MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-15-2017, 12:17 PM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
Anti scale coatings

Hey guys so I have been using brownells ATP coating (first link below) on all my blades before HT unless they go in a foil packet. So with this brownells a lot of the time some of it flakes off in the oven. Well I am getting close to needing to order more and wondering what you guys use? maybe something better? I did a quick search and found a few things (links below) PCB was one from MSC or rosemill.com has it also. The final link has 2 versions of stuff called ESPON-SR and ESPON-HF....any one ever try any of these OR any other ideas???

What I have been using
http://www.brownells.com/gunsmith-to...prod23076.aspx

NEW STUFF
PCB...... https://www.mscdirect.com/product/details/79611349

ESPON..... http://www.metalcoatingsandlubricant...compounds.html
Reply With Quote
  #2  
Old 06-15-2017, 02:39 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Dave I couldn't remember the name of the compound I used

The Espon SR was what we used. It was a white paste that we used, possibly a light yellow, but that was 9 years ago. It worked good and I don't remember it flaking unless you bumped it. It is probably a better composition now. It comes off during oil quench on 440C as I remember, same for O1. I used it on D2 quite a bit and my knives could have been finished if they wouldn't warp during HT, but believe me I tried a couple of times and I had to leave 1/16" on the edge or it would wave out on me. That's how some of my 4" blade D2 knives became 2 1/2" blades.lol Also the stuff we used you couldn't thin with water, it is a paste.

Dave the Espon HF looks like a better product, the stuff I used was definitely not pink. Reading the specs it appears to be a better grade of anti-scale. Text them or call and ask if you could have a sample for a couple of knives to see how they work, 10 Kgs. for the SR is a lot of compound and 50 for this stuff is through the roof.

Last edited by jimmontg; 06-15-2017 at 02:49 PM. Reason: further info
Reply With Quote
  #3  
Old 06-15-2017, 02:51 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Oh Dave the stuff we had was NOT made in India. I am not certain now that this is the same stuff, unless this company up and fired American workers and moved to India in which case to heck with them, get the MSC stuff.


__________________
Now it says Guru and it used to say Master. I think I like Master better, though skilled would be the best description

Last edited by jimmontg; 06-15-2017 at 03:47 PM. Reason: addition
Reply With Quote
  #4  
Old 06-15-2017, 03:49 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
It isn't political to want to save US jobs, it's common sense.


__________________
Now it says Guru and it used to say Master. I think I like Master better, though skilled would be the best description
Reply With Quote
  #5  
Old 06-16-2017, 07:14 AM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
HA Ha jim thanks for the info and yes I agree with you
Reply With Quote
  #6  
Old 06-16-2017, 11:44 PM
Bob Hatfield Bob Hatfield is offline
Steel Addict
 
Join Date: Apr 2004
Location: Northern CA.
Posts: 114
I have and still use the Brownell's ATP anti scale coating and never had problems with if flaking off in the heat treat oven. I cleaned the blades very well with acetone prior to bushing the coating on and let it fully dry prior to placing in the oven. You can also use alcohol for cleaning instead of acetone.

I t would flake off in the quench oil, but that just made clean up a lot easier.


__________________
RELH
Reply With Quote
  #7  
Old 06-17-2017, 05:19 AM
WBE WBE is offline
Skilled
 
Join Date: Feb 2009
Posts: 484
Quote:
Originally Posted by Bob Hatfield View Post
I have and still use the Brownell's ATP anti scale coating and never had problems with if flaking off in the heat treat oven. I cleaned the blades very well with acetone prior to bushing the coating on and let it fully dry prior to placing in the oven. You can also use alcohol for cleaning instead of acetone.

I t would flake off in the quench oil, but that just made clean up a lot easier.
Me too. A very good product. A jar of it goes a long way and is reasonably priced.
Reply With Quote
Reply

Tags
440c, bee, blade, blades, cleaning, common, edge, heat, heat treat, knife, knives, made, metal, scale, supplies, tools, wave, white, yellow


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anti-Scale Coating ATP-641 migolito Heat Treating and Metallurgy 3 05-05-2013 06:11 AM
Thoughts/Experiences with Anti-Scale compounds? ARCustomKnives Heat Treating and Metallurgy 7 04-09-2011 07:24 PM
who uses anti-scale compound ? rabbit_skinner The Newbies Arena 4 10-29-2003 12:04 AM
blade coatings Justin High-Performance Blades 1 04-23-2003 08:38 PM
blade coatings Justin The Newbies Arena 1 04-22-2003 12:51 PM


All times are GMT -5. The time now is 02:16 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved