|
|
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
info on Bolster hidden pins ??
Damascus bolsters going on the next build........ (thanks Jim)
hidden pins ........ question for hidden pins.....? same pins as a normal set of peened bolsters ? or is there a standard diameter/material that is recommended for hidden pins ? Thanks |
#2
|
||||
|
||||
I like to tap the blind hole in the bolsters, then use threaded rod one size smaller than the threaded hole (so it slips right up inside). Then I fill the hole with resin (JB Weld works well) and push it together. Now for the bolsters to come off you actually have to shear the resin in half.
I originally used to do this with a press fit...no resin, and I would have the threaded rod just slightly too thick to slide into the threaded hole and I would press the bolster on. It works ok but sometimes something goes awry and you end with a small gap between the bolster and blade and you have to start over. The resin method is easier. As for size, it depends on the project but 3/32" rod is about the size I use. |
#3
|
||||
|
||||
Quote:
|
#4
|
|||
|
|||
That's a great idea AUBE! I think I will give that a shot next time I do damascus bolsters. For the last knife I finished I just used 3/16" brass hidden pins sanded really well so besides glue there are no real mechanical bonds going on like AUBE's method.
|
#5
|
||||
|
||||
__________________ R. Yates 13 & On Forge Live and Let Live , Do Not trespass on Life or Me! As we are not so kind or forgiving ! |
#6
|
||||
|
||||
Quote:
|
#7
|
||||
|
||||
your welcome Ruger
__________________ R. Yates 13 & On Forge Live and Let Live , Do Not trespass on Life or Me! As we are not so kind or forgiving ! |
Tags |
art, blade, bolsters, brass, build, damascus, hidden, knife, knives, material, pins, press, project, resin, rod, weld |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
hidden pins under handle scales???? | brianblade | The Newbies Arena | 3 | 12-01-2009 07:35 PM |
Hidden (blind) pins question | KLC | The Newbies Arena | 11 | 11-12-2007 08:02 PM |
Hidden Pins | dave Stifle | Fit & Finish | 5 | 02-26-2007 09:07 AM |
peened hidden pins | SVanderkolff | Fit & Finish | 2 | 05-23-2003 11:10 PM |
Hidden Pins | Iron Tree | The Newbies Arena | 8 | 12-23-2002 06:46 AM |