MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Tool Time

Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old 05-30-2020, 10:53 AM
jacob7 jacob7 is offline
Enthusiast
 
Join Date: Feb 2012
Location: Virginia
Posts: 38
hydraulic fluid and press

Bought a 24 hydraulic press made for forging about 7 years ago used it some then got distracted. Now i'm retired and starting back up with damascus. to the point I don't seem to have the power I had before. It's taking me forever to draw a billet out with numerous heats. do I need to change hydraulic fluid and filter? Would it give me more press power? If not any suggestions? Thanks
Reply With Quote
  #2  
Old 05-31-2020, 10:50 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,344
I used to run a 20,000 ton press.

They changed the oil and filter every 5 years if that helps you.
I will say the oil they used and I used to top off the press was very thin, but at the time I wasn't into knife making, but it would have been a good quench oil.

Last edited by jimmontg; 05-31-2020 at 10:57 AM.
Reply With Quote
  #3  
Old 12-07-2021, 01:24 AM
Johnpatrick Johnpatrick is offline
 
Join Date: Dec 2021
Location: United States
Posts: 1
I agree with jammontg.
Reply With Quote
  #4  
Old 12-08-2021, 07:02 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,384
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Hydraulics is one of those things.... that if not used regularly, things tend to deteriorate. Seals dry and can crack or chip. Pump internals can do the same thing.... causing less flow and/or pressure. If the press has set for a long time, it could be any number of issues. I would start by changing the oil/filter(s)..... but remember that some machines/systems use only a specific type of hydraulic fluid...and mixing them usually is "bad ju-ju".

Having sat for a long time, you want to be VERY observant of hoses....those will also dry out/crack, and a pin hole, depending on pressures, could be deadly.

Not trying to scare you, but far too many simply don't understand the forces being dealt with when it comes to hydraulics. And in this case, ignorance could kill you.


__________________
WWW.CAFFREYKNIVES.NET

Caffreyknives@gmail.com

"Every CHOICE has a CONSEQUENCE, and all your CONSEQUENCES are a result of your CHOICES."
Reply With Quote
  #5  
Old 12-08-2021, 09:29 PM
KenH KenH is offline
Steel Addict
 
Join Date: Dec 2012
Location: South Baldwin Co across the bay from Mobile, AL
Posts: 117
I'm with Ed, first thing I'd do is change oil 'n filter - AND check the pressure on the pressure gauge...... it does have a pressure gauge? If not, I'd put one on first thing.
Reply With Quote
Reply

Tags
a, art, back, billet, ca, case, damascus, forging, hydraulic press, made, press


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Arbor Press vs Hydraulic Press for logo marking Tasdevil Tool Time 0 05-26-2013 04:33 AM
My Hydraulic press BrianT Ed Caffrey's Workshop 2 11-08-2008 06:43 PM
re: hydraulic press paul savage The Damascus Forum 2 07-24-2004 10:45 PM
hydraulic press Smitty Tool Time 7 01-31-2003 11:45 AM
Hydraulic press moldy Jim Tool Time 22 01-28-2002 10:14 PM


All times are GMT -5. The time now is 02:18 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved