MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions

Knife Making Discussions A place to discuss issues related to all aspects of the custom knifemaking community.

Reply
 
Thread Tools Display Modes
  #271  
Old 05-09-2009, 10:28 PM
Bear_Blade's Avatar
Bear_Blade Bear_Blade is offline
Steel Addict
 
Join Date: May 2009
Location: Alberta, Canada
Posts: 225
Hey guys, I just read this thread... start to finish, first thought... Holy Crap!!! that was a lot of testing. Amazing! I have to admit until I read this post, I too was advised to use Devcon 2 ton. Since this info is a little dated, I'm curious as to which "glue" are the current best bet? Has there been any developments or improvements reciently? I would be gratefull for any direction or advice from anyone willing.

Thanks!!


__________________
Please feel free to visit my website
www.rodrigueknives.com
Reply With Quote
  #272  
Old 05-09-2009, 10:42 PM
EdStreet EdStreet is offline
Guru
 
Join Date: Sep 2005
Location: Columbus, GA
Posts: 1,050
The latest is still the old tried and true. Will take some major amounts of engineering to over throw the kings of epoxy.

Oh and from all the testing JB weld is CRAP


__________________
Gold is for the mistress - silver for the maid
Copper for the craftsman cunning in his trade.
"Good!" said the Baron, sitting in his hall
But steel - cold steel is master of them all.
Rudyard Kipling (1865 - 1936)
Reply With Quote
  #273  
Old 05-10-2009, 10:11 AM
DaveL DaveL is offline
Skilled
 
Join Date: Oct 2002
Location: Tennessee
Posts: 449
LocTite is and always has been the ultimate adhesive. I still use 330 Depend and am fully aware of the tests.
Reply With Quote
  #274  
Old 03-29-2011, 06:08 PM
weko weko is offline
 
Join Date: Jul 2010
Posts: 1
Hi guys,

this is one of the top threads I've ever read even if it has put me off using Devcon. I mostly make stick tang scandi type knives where I cannot always rely on any pins or bolts holding the tang. Therefore a very good slow curing adhesive is more than essential for me. I live in the UK and after I finished reading started to search for Acraglass and Loctite Hysol E120.
No success though. They only sell Acraglass Gel for gunstock and there's no sign of L. Hysol E120 to be sold in England.
Do you know if it is sold here or what's the trade name in Europe?
Would you suggest some equivalent for me,please.

Your help would be much appreciated.
Thanks a lot,

Pete
Reply With Quote
  #275  
Old 03-15-2015, 11:49 AM
Steve Works Steve Works is offline
Registered
 
Join Date: Mar 2015
Posts: 1
Have you tried Sika? Heard it's quite effective. Let me know.
Reply With Quote
  #276  
Old 05-09-2022, 04:03 PM
Steve O Steve O is offline
Registered
 
Join Date: May 2022
Posts: 1
Hello everyone.

Im sorry if this post is a pita...

I had googled to learn the best epoxy for a knife project and was led here, to this great old thread. Theres a lot here, and most i suspect may not apply to my application.

I joined so that i could post this question. Maybe someone can fill in the gaps of understanding for me.

So, im tasked with repairing a hollow metal handled table knife for mom. The handle is sst, filled/weighted with some sort of plaster. The sst blade has become loose, i suspect too many cycles in the dishwasher has ruined the 'plaster' bond on the tang of the knife blade. 84 year old mom had attempted to repair it with hot melt glue. That worked for a short period of time but is loose again. This time im going to attempt to do it better.

So, ive dug out moms old hot glue. The bottom end of the hollow handle still has the 'plaster' material in it. The top half, where the blade tang is inserted, is currently hollow. I plan to simply fill the hollow handle with the recommended epoxy, insert the tang of the knife blade and let it cure. The 1/8" dia x 1 1/4" long tang does not fit tight into the handle. The hollow of the handle is maybe 3/8" inner diameter. So, i will need to carefully position the blade tang in the epoxy and clamp/hold it straight while the epoxy cures. The blade tang has a couple of flats on it, i imagine to help prevent the tang from turning in its mating hole.

Im kind of referring to this as a 'floating' mount. Not really 2 close surfaces with a thin layer of epoxy between surfaces.

So, which epoxy did you guys deem the best for this 'floating' application? I saw one post which made reference to metal to metal... loctite 324, or JB Weld, or PC7...but am not sure if my application is truly what you would call 'metal to metal'. Its not a sandwiched bond.

Any suggestions would be awesome!
Reply With Quote
  #277  
Old 05-09-2022, 07:36 PM
Bob Hatfield Bob Hatfield is offline
Steel Addict
 
Join Date: Apr 2004
Location: Northern CA.
Posts: 114
Since your mom will be cleaning the knife in a dishwasher, I would suggest using the J B Weld as your epoxy. It will adhere to most materials with a strong bond and will withstand the moisture and high heat from a dishwasher without breaking down like many other epoxies.
J.B. weld is a very dark colored epoxy that may show at the joint.


__________________
RELH
Reply With Quote
Reply

Tags
a, apply, awesome, blade, epoxy, fixed blade, forge, glue, handle, hot, knife, knife making, knives, made, making, material, materials, mount, pins, post, project, tang, weld


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:55 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved