|
|
Knife Making Discussions A place to discuss issues related to all aspects of the custom knifemaking community. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
aluminum
does anyone have a source for aluminum? im trying to find aluminum blocks around 3x4.5x1/2 any ideas?
thanks bill __________________ Cowards die many times before their deaths; the valiant never taste death but once. --Shakespeare: Julius Caesar |
#2
|
||||
|
||||
Bill,
There's a metal scrap/recycle yard not far from my work. I get stuff like that there. Maybe there's one in PA. Steve Danger! I can easily loose 2 hours wandering around the piles of junk steel coming up with all sorts of things to make. It might happen to you. |
#3
|
||||
|
||||
a couple of our local steel suppliers carry Al. for decent prices..might be the same there
|
#4
|
||||
|
||||
If you don't have any luck locally, give Nolan Supply a call. Their number is 800-736-2204
They will cut to your size specs and have no minimum order. I've used their services for many years........ |
#5
|
|||
|
|||
thanks alot guys
Steve, i went to a car junkyard one time to findseatbelts for a landcruiser at around 10am at around 5pm the guy had to kick me out __________________ Cowards die many times before their deaths; the valiant never taste death but once. --Shakespeare: Julius Caesar |
#6
|
|||
|
|||
Try E-Bay in indstrial supplies. I've seen aluminum listed in just about every size. The downside is shipping charges.
|
#7
|
|||
|
|||
Try ....North Coast Metal Mart...
They supply in small quantities to hobbyists..I have purchased alu from them and their service has been very good. http://store.yahoo.com/northcoastmetalmart/index.html __________________ Kevin Davey |
#8
|
||||
|
||||
Try metal supermarkets, its a bit pricy but they usually have end cuts. They are located all over Canada and the USA. I manage the warehouse for one in Edmonton, Alberta. We get alot of knifemakers as customers. We also cut to size.
Have a great one and hope this helps Robert |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|