|
|
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wooden sheath..
This is the kitchen knife I just made with the granit handle.It is for my niece who works in a sandwich shop so it had to be able to be carted back and forward to work safely so I made a wooden sheath for it.She loves peacocks so it got a feather on iy too. ;D
Cheers KIM Last edited by Kimall; 01-01-2013 at 04:10 AM. |
#2
|
||||
|
||||
Very nice Kim. Like the addition of the peacock feather.
Did you line the interior? Happy New Year! __________________ Carl Rechsteiner, Bladesmith Georgia Custom Knifemakers Guild, Charter Member Knifemakers Guild, voting member Registered Master Artist - GA Council for the Arts C Rex Custom Knives Blade Show Table 6-H |
#3
|
||||
|
||||
Very nice! I love wood sheaths. Lucky niece. I would love to see a tutorial on making something similar.
Tony Z |
#4
|
|||
|
|||
Thanks guys.I did not line it as it is for use daily in a sandwich shop kitchen and will possibly getting put away wet some times so it is open both ends to let the air through to help prevent corrosion.I just felt the leather might hold the moisture.She loves peacocks so it got a feather..
Cheers KIM |
#5
|
||||
|
||||
You sir, surprised me. When I saw "wooden sheath" I was prepared to laugh a little. Very well done, I like it!
|
#6
|
||||
|
||||
Makes sense Kim. Have you looked at any of Tai Goo's one-sided sheaths? Little different but good open air concept. Not as much room for embellishment.
__________________ Carl Rechsteiner, Bladesmith Georgia Custom Knifemakers Guild, Charter Member Knifemakers Guild, voting member Registered Master Artist - GA Council for the Arts C Rex Custom Knives Blade Show Table 6-H |
#7
|
|||
|
|||
Looks good, what kind of wood is that oak and what is the red liner?
|
#8
|
|||
|
|||
Thanks guys for the comments I just got back from delivering the knife and my niece was very happy with the new knife.The wood in this was just some pine I was given some time ago and the insert is purple heart.
Crex I have not really seen any other wooden sheaths around so will go and have a look at the link thanks for that. Cheers KIM |
#9
|
||||
|
||||
Strikingly pretty for "just some pine". My first thoughts were wide striped zebra wood.
I like the contrast in yours. Did you make your own bullet stud? I've done several wood scabbard/sheaths over the years and usually tried to match grain patterns front to back and scabbard to handle. I have also used ivory, bone, and horn for scabbards on a lot of my miniatures. The mini's are a bit tedious...no room for error. __________________ Carl Rechsteiner, Bladesmith Georgia Custom Knifemakers Guild, Charter Member Knifemakers Guild, voting member Registered Master Artist - GA Council for the Arts C Rex Custom Knives Blade Show Table 6-H Last edited by Crex; 02-18-2023 at 07:45 AM. |
#10
|
|||
|
|||
Wow Carl those are striking works of art very nice.I did not make a stud it was something I had in my leather work box.When the guy bought the "Pine" to me it was to put in a bow I was making him and the guy at the shop told him it was an exotic imported timber from africa but as soon as you cut it you could tell it was pine.I used it this time because it was a bit differant and pine burns nice for the art work.
Cheers KIM |
#11
|
||||
|
||||
I think you did very well with the pine, don't see any domestic pine around here with the black stripes in the grain...really nice look.
Those mini's are in a museum in Milano, Italy. Like making the little guys. Thought I had pics of a couple of large (full size) daggers with wooden sheaths but can't find the disc. __________________ Carl Rechsteiner, Bladesmith Georgia Custom Knifemakers Guild, Charter Member Knifemakers Guild, voting member Registered Master Artist - GA Council for the Arts C Rex Custom Knives Blade Show Table 6-H |
Tags |
art, back, handle, horn, ivory, kitchen knife, knife, leather, made, make, make your own, making, pine, sheath, sheaths, tutorial, what kind, wood |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wooden Sheath Help | Eli Jensen | The Sheath/Holster Makers Forum | 4 | 09-27-2011 07:37 PM |
Wooden sheath lining | Eli Jensen | The Sheath/Holster Makers Forum | 3 | 08-10-2011 10:50 AM |
nickel accents on a wooden sheath | pipecrafter | The Sheath/Holster Makers Forum | 4 | 05-21-2009 12:41 PM |
Wooden Sheath | VSMBlades | The Sheath/Holster Makers Forum | 2 | 11-04-2004 08:23 AM |
Wooden sheath tutorial | Jamey Saunders | The Sheath/Holster Makers Forum | 2 | 11-06-2002 08:03 AM |