MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > The S.R. "Steve" Johnson Forum

The S.R. "Steve" Johnson Forum Specialized knife making tips, technique and training for "ultra precision" design work enthusiasts.

Reply
 
Thread Tools Display Modes
  #1  
Old 06-01-2015, 02:11 PM
TWITHERS TWITHERS is offline
Enthusiast
 
Join Date: Aug 2011
Location: Linden, CA
Posts: 56
Mother Of Pearl Help

I have been asked to make a small sub-hilt and the customer has given me some MOP he wants me to use for the handle. I have never worked with this material and I am hoping for some pointers. Such as does it drill, cut and grind like other materials or do I need special drill bits etc.? It is only about 1/8" thick so I am assuming just leaving it flat, no contours is acceptable? Can I use liner material with MOP? I would think so but doesn't hurt to ask. Also I plan on using Corby bolts so I need to counterbore for these, any problems there? Any tips would be appreciated. Thanks.
Reply With Quote
  #2  
Old 06-01-2015, 07:23 PM
Steve's Avatar
Steve Steve is offline
Moderator
 
Join Date: Jun 2002
Location: Manti, Utah USA
Posts: 1,244
Some ideas. Use them all, or whatever you like. I'm sure there are others out there.
Use brand new drills and counterbores, or at least "very sharp" ones. Carbide are best. Bathe it in paint thinner with a solder brush. Back up the "off side" when drilling to help stop "popping out" when the drill reached through. A friend super glues thick liner material on the other side and it stope the popping through. Don't get it too hot when shaping, or the bolts too hot, though it can take more heat than, say, horn and woods, maybe...... You can contour if you have enough material, but 1/8" is pretty thin. Depends on the size of the handles, I guess. Put super glue in any "checks" before sawing, use a 16-18 tooth saw blade, the finer blade won't chip it like a coarse one will. I bought a 1/4" and a 5/16" carbide counterbore for each size corby bolt. Much sharper for much longer, but they are like $100.00! Liners are fine.


__________________

http://www.srjknives.com
NRA Endowment Member
Knifemakers' Guild Member since 1971
"May you live all the days of your life." - Jonathan Swift
Reply With Quote
  #3  
Old 06-02-2015, 11:14 AM
TWITHERS TWITHERS is offline
Enthusiast
 
Join Date: Aug 2011
Location: Linden, CA
Posts: 56
Thank you, I appreciate the help. Paint thinner as a cutting lubricant, I would never have thought of that!
Reply With Quote
  #4  
Old 06-03-2015, 08:18 AM
Steve's Avatar
Steve Steve is offline
Moderator
 
Join Date: Jun 2002
Location: Manti, Utah USA
Posts: 1,244
A lubricant - and a coolant. It helps cut without making that little "circle" around the edge of the hole. Anything to make the drill and c'bore cut clean. But remember: If the tool isn't dead sharp the chance of problems increases dramatically, no matter how much lubricant, or whatever is applied.


__________________

http://www.srjknives.com
NRA Endowment Member
Knifemakers' Guild Member since 1971
"May you live all the days of your life." - Jonathan Swift

Last edited by Steve; 06-03-2015 at 10:11 AM.
Reply With Quote
  #5  
Old 06-03-2015, 01:17 PM
TWITHERS TWITHERS is offline
Enthusiast
 
Join Date: Aug 2011
Location: Linden, CA
Posts: 56
I will take your advise and get some new bits and use the fine tooth saw blade. Thanks again.
Reply With Quote
  #6  
Old 11-12-2015, 08:34 AM
TWITHERS TWITHERS is offline
Enthusiast
 
Join Date: Aug 2011
Location: Linden, CA
Posts: 56
Took all of your advice on the pearl. Jim Cooper took this great photo.
Attached Images
File Type: jpg Withers_151110-web.jpg (193.3 KB, 87 views)
Reply With Quote
  #7  
Old 11-12-2015, 08:51 AM
Don Robinson's Avatar
Don Robinson Don Robinson is offline
Hall of Famer
 
Join Date: Jan 2003
Location: Brownsville, Texas
Posts: 4,873
Wow!!
Reply With Quote
  #8  
Old 11-12-2015, 02:44 PM
Steve's Avatar
Steve Steve is offline
Moderator
 
Join Date: Jun 2002
Location: Manti, Utah USA
Posts: 1,244
What a beautiful job, Tim. It looks perfect!


__________________

http://www.srjknives.com
NRA Endowment Member
Knifemakers' Guild Member since 1971
"May you live all the days of your life." - Jonathan Swift
Reply With Quote
  #9  
Old 11-12-2015, 04:03 PM
TWITHERS TWITHERS is offline
Enthusiast
 
Join Date: Aug 2011
Location: Linden, CA
Posts: 56
Thank you both very much. I gave it my best that is for sure. You know Mr. Cooper taking the pictures is a big plus. I took all of your advice. I even glued liner material to the back of the pearl before drilling. I did not get the carbide drills, but I will. I now see how hard the material would be on tools. Here is another pic from Jim.
Attached Images
File Type: jpg Withers_151110B-web.jpg (170.6 KB, 53 views)
Reply With Quote
  #10  
Old 11-12-2015, 05:44 PM
Steve's Avatar
Steve Steve is offline
Moderator
 
Join Date: Jun 2002
Location: Manti, Utah USA
Posts: 1,244
Very beautiful job, Tim. Killer of a solder job! Cool spacer with no-screw attachment.
You'll enjoy the carbide, well worth the expense, considering the frustration they save, but I'd still use paint thinner.


__________________

http://www.srjknives.com
NRA Endowment Member
Knifemakers' Guild Member since 1971
"May you live all the days of your life." - Jonathan Swift
Reply With Quote
  #11  
Old 11-13-2015, 09:00 AM
TWITHERS TWITHERS is offline
Enthusiast
 
Join Date: Aug 2011
Location: Linden, CA
Posts: 56
Thanks again. Its not skill that gets my solder job done, it is patience. And I'm running out of that. I of course have your video, who doesn't? I see how easy it is for you but for me...I solder then scrape, then sand then buff. Pain in the butt, I tell you. Each time though I think I learn a little bit more so it will get faster.
Reply With Quote
  #12  
Old 11-14-2015, 11:56 PM
Steve's Avatar
Steve Steve is offline
Moderator
 
Join Date: Jun 2002
Location: Manti, Utah USA
Posts: 1,244
You are on the exact track of learning how to solder a guard onto a knife. Keep plugging!


__________________

http://www.srjknives.com
NRA Endowment Member
Knifemakers' Guild Member since 1971
"May you live all the days of your life." - Jonathan Swift
Reply With Quote
  #13  
Old 11-14-2016, 04:18 PM
TWITHERS TWITHERS is offline
Enthusiast
 
Join Date: Aug 2011
Location: Linden, CA
Posts: 56
Earlier in this post you suggested I get carbide counterbores Steve. Where do I buy them?
Reply With Quote
  #14  
Old 11-14-2016, 08:50 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
I do not not know where to get carbide counterbores. May have to to use a combination of carbide drill bit and end-mill. I have looked at two of the biggest supply places. If they exist they will be single drill and end-mills at a specialty shop.
Reply With Quote
  #15  
Old 11-16-2016, 08:44 AM
zappo's Avatar
zappo zappo is offline
Enthusiast
 
Join Date: Mar 2010
Posts: 85
Send a message via AIM to zappo
MSC has them, and if you watch they'll put them on sale occasionally.

Like Steve said they are not cheap.


__________________
Zane Blackwell
Member: Knife Rights
Reply With Quote
Reply

Tags
advice, back, bee, blade, brand, drill, flat, grind, handle, heat, horn, hot, knife, make, material, materials, mother of pearl, paint, pearl, saw blade, sharp, small, solder, tips, woods


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"World Record Blacklip Pearl Auction" by Mother of Pearl, Inc. KNAdmin Knife Network :: Announcements 2 06-07-2005 10:18 AM
Mother of Pearl Drac Fit & Finish 3 11-22-2004 09:03 AM
Mother of Pearl Bob Rosenfeld Fine Embellishment 1 07-25-2002 05:39 PM
Mother of Pearl Shotgunone The Supply Center 3 05-23-2001 07:40 PM


All times are GMT -5. The time now is 04:30 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved