|
#1
|
||||
|
||||
RMK Sasquatch question
Hello everyone. I am knew to this knife forum and I am absorbing as much information as possible. I have been collecting some folder fighting knives and recently moved into Randalls. I have always enjoyed Randall knives since I was 15.
Anyway, I have interest in the Sasquatch model. Can anyone tell me additional information on this beautiful Randall knife? Thank you for any info. |
#2
|
|||
|
|||
They are available through a Randall Dealer in Danielson, CT named Doug Kenefick. "Doug's number is 860-774-8929 (M-F, about 9-4 EST). You can also get him at 860-774-7214 during the evenings and weekends" -(http://www.knifeforums.com/ubbthread...b=9&o=&fpart=1)
__________________ Christopher Meyer, Shenipsit Forge |
#3
|
||||
|
||||
Welcome gatorzingo!
Hi gatorzingo, and welcome to the Knife Network and the Randall Knives Forum!
Each authorized RMK dealer has a special Randall knife which they designed and is only available by order from them. The "Sasquatch" is one of these and is offered by Doug Kenefick of Connecticut. (Thanks for providing the contact information above, Chris) Doug doesn't havw a website or use email. The "Sasquatch" actually comes in two blade sizes: an enormous 11 inch version which is only available in tool steel, and a little brother at 8 inches which can be ordered in stainless. Many handle, hilt and butt end options are available, as is customered supplied material. I'm not sure of the present wait time for ordering but if you are in a big hurry (like most of us) there are always various versions pooping up on the dreaded eBay. I hope this helps! Cheers! David __________________ It takes less effort to smile than to frown ! |
#4
|
||||
|
||||
Thanks for the help. I contacted Mr Kenefik and placed an order for a matching pair of Sasquatches.
|
Tags |
blade, knife, knives |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|