|
|
|
|
|
|
||
|
|
|
|
||
|
|||||||
| Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
| The Display Case A place to post your latest knives and creations. Let the Knife Network community see your work first! |
 |
|
|
Thread Tools | Display Modes |
|
#1
04-16-2004, 08:43 AM
|
||||
|
||||
|
Something from the Brazilia Custom Cutlery Show
This is from the table of Edson Vieira... and a bit of my own too.
 First knife is 11" 52100 bowie camp knife and rosewood handle I made for personal use. I took it to the show to enter the cutting competition. It is stained cause it is in constant use. The second is one of Edsons finest reproductions of the old sorocabana knives. It was his hunting knife for more than an year. It features cow bone and horn in a 5160 integral boster blade. The third is an original sorocabana. It must be some 60 years old or more. And the last one was an order from a USA costumer, featuring buffalo horn, german silver and 5160. Comments always apreciated. __________________ Jeff Velasco ------------------------------------------- Pesquise posts antigos antes de perguntar: Use CKD  ? mais r?pido e f?cil! 
|
|
#2
04-16-2004, 09:20 AM
|
||||
|
||||
|
Sweet!
__________________ "Many are chosen, but few are Pict" "The doer alone, learneth" NT Neo-Devo 
|
|
#3
04-16-2004, 09:57 AM
|
||||
|
||||
|
They all look great. I think the patina on that big bowie is plus in the looks department.
__________________ Avatar is my Wild Goo.
|
|
#4
04-16-2004, 10:22 AM
|
||||
|
||||
|
Jeff,
Once again you have proved that there is a great amount of talent there. I wish that I could be at the show just to admire it. Very nice. Gary
|
|
#6
04-16-2004, 10:51 AM
|
||||
|
||||
|
Since I got that bad verebrae in my lower back I have been slow to very limited forging.. I hope I can finish that little bowie fighter I have been working on... but I am a hobbist maker now
 so I have no real rush.Those guys are really tallented. I am very proud to work for them. It is a great inspiration for such a begginer like me. Edson's work is particularly exotic, and very accurate as you can see on his reproduction. __________________ Jeff Velasco ------------------------------------------- Pesquise posts antigos antes de perguntar: Use CKD ? mais r?pido e f?cil!
|
|
#8
04-16-2004, 11:39 AM
|
|||
|
|||
|
All very nice!
-Darren __________________ Gas Forges, Refractory, & Knifemaking Supplies Refractory.EllisCustomKnifeworks.com Visit the Forge Gallery - forge building resource pages ForgeGallery.EllisCustomKnifeworks.com
|
|
#9
04-26-2004, 09:26 AM
|
||||
|
||||
|
Here is another one I got this week from Edson:
__________________ Jeff Velasco ------------------------------------------- Pesquise posts antigos antes de perguntar: Use CKD ? mais r?pido e f?cil!
|
|
#10
04-26-2004, 10:57 AM
|
||||
|
||||
|
I really like that skinner!! I like everything but the way the bolster is at an angle and also tapers down to the blade is really cool!!
|
|
#11
04-26-2004, 11:40 AM
|
|||
|
|||
|
This one by Edson is a beauty and deserves it's own thread, imho
|
|
#12
04-26-2004, 11:48 AM
|
||||
|
||||
Good point Dave.. I will take care of that!
__________________ Jeff Velasco ------------------------------------------- Pesquise posts antigos antes de perguntar: Use CKD ? mais r?pido e f?cil!
|
|
#13
04-27-2004, 01:34 AM
|
|||
|
|||
|
No doubting the talent from your regions. Those are spectacular looking blades. I love the "cross-cultural" aspects of knives and these really get my blood pumping. Jason.
__________________ JASON CUTTER BLADEART Jason Cutter @ Dr Kwong Yeang Knifemaker, Australia (Matthew 10.16)
|
|
| Tags |
| blade, forging, hunting knife, knife, knives |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
