|
|
Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
1x30 2 wheel grinders?
I found myself in an in between place for polishing up stone. I have diamond wheels but not in the higher grades and the SC belts I use go up to 600 grit. Talking with some stone hounds the 9 micron diamond belts would work quite well. (Would also like 25 and 15 micron sizxes.) So I hit up Tru Grit and found out that a 2x72" is in the $100 range and I have a minimum order of 2. Scott suggested a 1x30" belt.
Looking at 1x30" sanders they tend to be 3 wheel types. I would like to be able to grind on a contact wheel. The other issue is that they run at high SFPM rates so grinding stone wet needs to be done at low speeds. To build up a variable 1x30 rig I may as well just pop for the 2x72" to use on the big Burr King. Thoughts? Sources for 2x72" diamond belts? __________________ Mike |
Tags |
2x72, agate, belt, belts, buffer, build, burr king, conversion, diamond, grind, grinding, hand, handle, htm, iron, knife, leather, polish, scratch, small, steel, stone, tap, water, wheels |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
two wheel grinders | irondun | Tool Time | 6 | 11-23-2012 09:38 AM |
grizzly vs 1x30 | dan adams1953 | The Newbies Arena | 5 | 08-13-2004 11:11 PM |
1x30 sander | Josh Blount | Tool Time | 5 | 02-11-2002 08:54 PM |
1x30 | Vaquero57 | Tool Time | 6 | 02-26-2001 11:32 PM |
homemade 1x30 | Vaquero57 | Tool Time | 3 | 02-19-2001 10:43 PM |