MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Ed Caffrey's Workshop

Ed Caffrey's Workshop Talk to Ed Caffrey ... The Montana Bladesmith! Tips, tricks and more from an ABS Mastersmith.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-25-2013, 05:13 PM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
New digs in north Idaho

Hi gang!

Here are a few pics of the 20x36 (with 20x20 overhang). The outside is done and has a bathroom and shower (hint...visitors welcome after we get moved up). No insulation yet and about half of the shop is wired (will have 6 220 outlets and about 20 110s when complete).

I hate still being in Colorado and the shop so far away, but, hopefully, come next spring, we'll be moving....yeehaa!

Dana
Attached Images
File Type: jpg Shop2.jpg (274.7 KB, 105 views)
File Type: jpg Shop1.jpg (284.1 KB, 108 views)
File Type: jpg Shop4.jpg (253.9 KB, 113 views)
File Type: jpg Deere.JPG (130.4 KB, 110 views)

Last edited by Dana Hackney; 09-25-2013 at 05:37 PM.
Reply With Quote
  #2  
Old 09-26-2013, 01:26 AM
cdent cdent is offline
Master
 
Join Date: Aug 2005
Location: aiea, hi
Posts: 786
That is nice Dana. Great looking lot.

Where's the bbq and when's the hammer-in, Craig
Reply With Quote
  #3  
Old 09-26-2013, 06:54 AM
MLAZYB's Avatar
MLAZYB MLAZYB is offline
Skilled
 
Join Date: Dec 2006
Location: Spring Creek Nv
Posts: 458
Very nice Dana. I also like your choice of tractor.
Plus 1 on the hammer in.


__________________
Bruce Bingenheimer
MLazyB Custom Knives
ABS Journeyman Smith
Reply With Quote
  #4  
Old 09-26-2013, 07:24 AM
Ed Caffrey's Avatar
Ed Caffrey Ed Caffrey is offline
Super Moderator
 
Join Date: Jun 2002
Location: Great Falls, Montana, USA
Posts: 4,254
Send a message via AIM to Ed Caffrey Send a message via Yahoo to Ed Caffrey
Love the looks of everything! Looking forward to an excuse to come visit!

By the way....JD Green looks good on ya!


__________________




Caffreyknives@gmail.com
"Nobody cares what you know.....until they know you care."
See me at table 2Q at the Blade Show!
Reply With Quote
  #5  
Old 09-26-2013, 09:00 AM
Jeremy Jeremy is offline
Steel Addict
 
Join Date: Jun 2011
Location: Idaho
Posts: 234
Man, that looks nice. North Idaho is sure pretty. If you're ever coming through SW Idaho, give me a holler and we can get some coffee and talk knives .

Jeremy
Reply With Quote
  #6  
Old 09-26-2013, 01:40 PM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
Thanks, Craig, Bing, Ed and Jeremy! We love that area and have been trying to get relocated there for some years now and it finally looks we'll make it by next spring/summer (Good Lord willing and the creek don't rise). Once we get the simple house up and the shop finished, we'll certainly break out the BBQ (for the deer, elk, moose, bear, cat, squirrel, turkey, grouse and whatever we can yank out the waters up here) and see what we can do with rounding up some real talent (Ed, Bing, Bruce, Steve, Roger,...) and hold a small hammer-in .

Jeremy, where about are you located in SW Idaho?

Ed and Bing: I like the green and yellow too. We got a fantastic deal from a really nice old retired preacher/rancher. He even delivered Lil' Johnny for free!

Take care guys,
Dana

Last edited by Dana Hackney; 09-26-2013 at 01:43 PM.
Reply With Quote
  #7  
Old 09-26-2013, 08:54 PM
boatbuilder's Avatar
boatbuilder boatbuilder is offline
Skilled
 
Join Date: Feb 2009
Location: Alberta
Posts: 342
Send a message via AIM to boatbuilder
Looks like paradise to me Dana. I'm sure you and Sandy will really enjoy getting out there full time. Look forward to coming that way for a visit and a few lessons from you.
Jim
Reply With Quote
  #8  
Old 09-26-2013, 09:55 PM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
Thumbs up

hi Jim!

You know you guys are always welcome! I'm not sure what I could show you but we can play in the shop anyway.

Dana
Reply With Quote
  #9  
Old 09-27-2013, 09:25 AM
Jeremy Jeremy is offline
Steel Addict
 
Join Date: Jun 2011
Location: Idaho
Posts: 234
Dana-
PM sent


Jeremy
Reply With Quote
  #10  
Old 01-28-2014, 09:32 PM
claymoore claymoore is offline
Steel Addict
 
Join Date: Jan 2012
Location: Washington State
Posts: 139
Thumbs up

Nice shop. Beautiful part of the country. Congrats
Clay
Reply With Quote
  #11  
Old 01-30-2014, 07:39 PM
Steve Randall's Avatar
Steve Randall Steve Randall is offline
Skilled
 
Join Date: Oct 2009
Location: Lincolnton,NC
Posts: 338
Dana great looking shop. Spring time hmm I need to start looking for flight connections .


Steve


__________________
North Carolina Custom Knife Maker's Guild
ABS Journeyman Smith
www.ksrblades.com
steve@ksrblades.com
Reply With Quote
  #12  
Old 02-01-2014, 03:00 PM
Dana Hackney's Avatar
Dana Hackney Dana Hackney is offline
Skilled
 
Join Date: Feb 2006
Location: Bonners Ferry, ID
Posts: 537
thanks guys! Steve: absolutely. Spokane is where you would need to fly into. It's about an hour and a half from our place.

Take care!
Dana
Reply With Quote
Reply

Tags
art, bee, hammer, knives, make, man, simple


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Knife Shop for Sale - Orofino, Idaho striddle General ::: Items and Bargains 14 10-20-2013 09:55 AM
Idaho trout fillet with green micarta brewthunda Knife Kits Forum 4 01-04-2006 07:16 PM
Tell me about SW Idaho Mike Routen Knife Network Community 2 06-16-2005 09:01 PM
Idaho Knifemaker Dies cwp Knife Network Community 5 09-28-2004 12:07 PM
Thanks for the new digs Jerry Oksman Feature & Member Support 2 06-19-2002 07:34 PM


All times are GMT -5. The time now is 04:42 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved