|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
A Low priced 2x72" Grinder
These came up in our Chat Room discussions last night. I hadn't heard of these before but they have apparently been around for a few years.
http://stores.ebay.com/oregonbladema...p2047675.l2563 They seem to offer a very low priced entry point for a 2x72" grinder, comparable in price to a Grizzly but more versatile. I am not convinced of the long term durability of these grinders as they are built with some aluminum and nylon parts but a lot will depend on how much you actually use it. Also, by the time you add a contact wheel and a good motor, etc the total price could increase to the point where this unit isn't significantly cheaper than a KMG. Still, it is a 2x72" 3 wheel design that has a lower entry cost than I've seen before and for many beginners that might make all the difference.... |
#2
|
|||
|
|||
You forgot my Russian one Ray.LOL
__________________ Now it says Guru and it used to say Master. I think I like Master better, though skilled would be the best description |
#3
|
||||
|
||||
No, I didn't. I try to be careful about anything thing I suggest a noob invest in. The Russian product could be great but an international order isn't something I'd suggest without some dependable feedback from people who owned the product ...
|
#4
|
|||
|
|||
It does look pretty good. I have a KMG so my opinion may be a little swayed. But seems like a KMG knock off like some others out there. I haven't done the research but I would be interested in a side by side comparasin both to other "knock off" and the kmg. I did see one that looked JUST like this at the blade show. I THINK I have a card from the guys. But its in my car packed in the suitcase if I even still have it...when I get home ill look and put up a link
|
#5
|
||||
|
||||
Sure, it is a KMG knock off. These days, you'd almost have to be nuts to make a grinder radically different from a KMG and expect it to sell very well. While looking at the eBay listings for this one I also saw a radically different one for even less money, I think it was from Serbia or somewhere in that area. Looked like it would work just fine but it probably won't sell well over here because a) it's from far over seas and b) just too odd looking ....
|
#6
|
|||
|
|||
Ray, correct if I'm wrong, but doesn't a KMG looks a lot like a knockoff of an old Burr King?
__________________ Now it says Guru and it used to say Master. I think I like Master better, though skilled would be the best description |
#7
|
|||
|
|||
if anything a kmg looks more like a bader than burr king
|
#8
|
||||
|
||||
I've never seen a Burr King that resembled a KMG in any way. That may well be why the Burr King, once the top dog among knife makers, is now hardly mentioned even though they still sell and advertise.
The KMG does look more like a Bader if the Bader was on steroids and worked out daily. A Bader is an excellent grinder but the market seems to like the heavier KMG more...... |
#9
|
|||
|
|||
Bader
Sorry Ray, Bader was what I was thinking about. A shop I worked in that made custom hand rails and stair rails had 3 of them and they did look like KMGs, but solid cast iron frame if I remember correctly. They had extensions for small wheels. Those things ran 8 hours a day as no weld went out of our shop that looked like a weld. They were not weak machines Ray and are still running according to an old co-worker there.
Walter Sorrells uses one he has had for at least 15 years or at least the motor is. Here is his video showing an old Bader and it doesn't look like a weak grinder. https://www.youtube.com/watch?v=yfa9q-K4BK0&t=682s Sorry about the Burr King mix up, I remember they made the square wheel grinders and in the 90's had an open motor option, stupid for a metal grinder. Doesn't save money if it explodes. __________________ Now it says Guru and it used to say Master. I think I like Master better, though skilled would be the best description |
#10
|
||||
|
||||
Never meant to imply the Bader was weak. The ones most knife makers see these days is the Bader III, I believe. A fine machine and will last a life time but still lighter built than a KMG (but I'm just judging by what I can see in the pictures). The KMG seems to have the advantage in available accessories as well...
|
#11
|
|||
|
|||
I agree with ray I know 2 people and have seen the badder work.,...Its not a bad grinder at all, BUT as ray said it is deffinitly a lightweight when compared to the KMG....I can grind more steel quicker with my KMG...and I also think KMG has more attachments out there now. I will give one thing to the bader it is #### near silent when compared to my grinder, So if you need to keep the noise down yeh its great but I think its also another point that the KMG is a heavier grinder for sure..........
|
#12
|
||||
|
||||
I've purchased a drive wheel and tracking wheels from this site when I was building my NWG. They were pretty quick and the product was good. I like them.
__________________ Mark |
#13
|
|||
|
|||
Not sure about the actuall quality never seen one in action but they were also at the blade show advertising a couple of there grinders http://www.wilmontgrinders.com/ They are not any cheaper but they are a KMG-ISH grinders
|
#14
|
||||
|
||||
I haven't seen one of the grinders, but those plastic wheels are what I have on my PBF Sling grinder. I don't use it constantly, and I doubt they are as good as aluminum, but they do work fine. They also offer the same grinder with aluminum wheels for just a little more. You can get their grinder, vfd, and motor for around a grand.
|
#15
|
||||
|
||||
Tags |
2x72, bee, blade, blade show, burr king, card, case, custom, design, grinder, hand, home, iron, kmg, knife, made, make, makers, motor, noob, nylon, sell, show, video, weld |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB: Used 2x72" Grinder | bgeorge81993 | General ::: Items and Bargains | 1 | 03-02-2016 02:43 AM |
Esteem 2x72" grinder for sale (variable drive) | Jay-Z | General ::: Items and Bargains | 11 | 09-21-2015 12:23 AM |
My completed 2x72" belt grinder | Hrothgar | Tool Time | 1 | 09-19-2015 02:38 PM |
"Buffing" in 2x72 grinder | alexkuzn | The Newbies Arena | 6 | 08-23-2006 10:36 PM |
Looking for a used 2x72 grinder | Kevin | General ::: Items and Bargains | 0 | 12-31-2003 04:42 PM |