ICC #5 1/4" thick ATS 8"blade with 416 ss guard and butt

[Highlander 1008]

Finally, the finest Battle Knife made in the world today. 100% custom and nothing is out sourced. 8" of 1/4" thick ATS, bead blasted, black micarta handles, 416 SS guards and butts, and everything is 100% custom. Sheath is 1/8" rather tan the .06 that almost all other makers use. Large Tekloc mounted for secure fit to tac vest or belt.

Nothing stands up to this knife - guard and butt welded and pinned, micarta inlayed between and held with recessed Loveless screws with the addition of expoxy - hand sculpted handle and butt to make the foundation of the knife virtually unbreakable. Everything is done from raw materials. Will provide references from various spec ops, CIA, Seals, Rangers and an attempt, by Marine force Recon, to do intentional damage to the knife but could not do anything but remove 1/16 of an inch of steel from the tip from hammering it into a steel reinforced building building (an entire squad and one knife). Can make in any steel but the cost will increase substantially. Lists for $650, last year cost $450. 2001 was $300, (increasing in value) ICCKnives Model #5 ? selling $550 or trade for precision AR flat top upper - 16" or 20" - 1:7 twist Obermeyer barrell

Sheath is 1/8" rather tan the .06 that almost all other makers use. Large Tekloc mounted for secure fit to tac vest or belt.

Nothing stands up to this knife - guard and butt welded and pinned, micarta inlayed between and held with recessed Loveless screws with the addition of expoxy - hand sculpted handle and butt to make the foundation of the knife virtually unbreakable.

Please IM me as my email is out of wack!