MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > Fit & Finish

Fit & Finish Fit and Finish = the difference in "good art" and "fine art." Join in, as we discuss the fine art of finish and embellishment.

Reply
 
Thread Tools Display Modes
  #1  
Old 12-08-2014, 11:52 PM
Duke C Duke C is offline
 
Join Date: Jan 2011
Location: Live Oak Ca.
Posts: 6
domed pins

Has any one out there made their own domed pins ? How do you do it? thanks Duke
Reply With Quote
  #2  
Old 02-10-2016, 01:52 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,198
Another unanswered question.http://www.knifenetwork.com/forum/images/smilies/redface.

Go to a weld supply store and buy some bronze rod and use a torch and melt the end to a little ball. Even a propane torch will do little dia. rod. They don't carry brass and I've never tried it cause I was a TIG welder and brass under an electric arc the zinc vaporizes so you end up with bronze anyway, but under a torch I guess it doesn't. Ask them for samples because they sell that stuff by the pound, but they have some neat alloys like aluminum bronze.

Stick the rod in a vise just above the top and leave about 1/8 in and melt it. Use vise grips if the vise pulls too much heat away, but it shouldn't. I have done it dozens of time, but I was using oxy-acetylene.

Last edited by jimmontg; 02-10-2016 at 01:57 AM.
Reply With Quote
  #3  
Old 04-19-2016, 03:59 AM
machinedock machinedock is offline
Member
 
Join Date: Apr 2016
Posts: 15
Nowadays, everyone wants fine and good finishing knives to cut fruits and veggies easily and more faster. so, i must say fast knife is the best choice for every one.
Reply With Quote
Reply

Tags
ball, brass, buy, knife, knives, made, ore, pins, rod, sell, store, supply, weld


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
? on pins Austin Cutlery The Newbies Arena 8 05-09-2013 08:41 AM
Domed pins rebglass Fit & Finish 2 04-24-2011 09:16 AM
Domed Pins Ron Hicks Ed Caffrey's Workshop 9 03-30-2006 05:14 PM
help with pins IronMonkey The Newbies Arena 2 03-03-2004 04:29 PM
Domed rubber for band saw wheels. Dan Graves Tool Time 3 11-25-2002 10:15 AM


All times are GMT -5. The time now is 09:19 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved