|
|
The Supply Center What's Hot ... and where the deals are! Supplies are our specialty ... |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1/4 Inch Bronze tubing
I finally ordered some bronze barstock and 1/8" bronze pins from Atlas Metals, but they don't carry tubing smaller than .552. Anyone know a source for bronze tubing suitable for thong hole liners?
__________________ Joel Bolden Halfmoon Knives Port Matilda, PA. http://s29.photobucket.com/albums/c2...&paginator=top http://s29.photobucket.com/albums/c2...&paginator=top |
#2
|
||||
|
||||
What size tubing do you need? If you supply the barstock I can turn some for you. Let me know the inside dia. wall thickness and outside dia.
|
#3
|
||||
|
||||
ive never bought some but you might want to try www.precisiontube.com or look through the supplier list at www.thomasnet.com
|
#4
|
|||
|
|||
Quote:
__________________ Joel Bolden Halfmoon Knives Port Matilda, PA. http://s29.photobucket.com/albums/c2...&paginator=top http://s29.photobucket.com/albums/c2...&paginator=top |
#5
|
|||
|
|||
Quote:
__________________ Joel Bolden Halfmoon Knives Port Matilda, PA. http://s29.photobucket.com/albums/c2...&paginator=top http://s29.photobucket.com/albums/c2...&paginator=top |
#6
|
||||
|
||||
Have you checked http://www.onlinemetals.com/merchant.cfm?id=850&step=2 ? They do small orders but do not have small dia. tubing. You would still have to drill/bore it. Good luck drilling it out evenly, I never could, one side would always be thicker. It would only take me five minutes to bore out several pieces, especialy if it's a small ID.
Last edited by B.Finnigan; 02-20-2006 at 06:46 PM. |
#7
|
|||
|
|||
Quote:
__________________ Joel Bolden Halfmoon Knives Port Matilda, PA. http://s29.photobucket.com/albums/c2...&paginator=top http://s29.photobucket.com/albums/c2...&paginator=top |
#8
|
||||
|
||||
I sent you a PM with details.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|