MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-16-2012, 10:45 AM
NJStricker's Avatar
NJStricker NJStricker is offline
Hall of Famer
 
Join Date: Sep 2005
Location: Central Ohio
Posts: 2,193
A simple stand for the Harbor Freight portable bandsaw.

Love or hate Harbor Freight, a lot of us that are hobby makers turn to them for inexpensive tools when operating a shop on a tight budget, especially if you are just starting out.

I've tried a variety of ways of cutting out knife blanks from bar stock. Angle grinder, drilling holes, etc. I finally decided that cutting out blanks was probably the slowest step in the knife making process for me, and decided to get a small bandsaw capable of cutting steel that would fit in my shop, which is basically part of my back yard shed. While I can buy more expensive bandsaws and ones that would probably last me longer, like many I had only so much money to play with and had other supplies to get also. So, I picked up a portable bandsaw from Harbor Freight, sold under their Central Machinery brand. It's variable speed (you can crank it down low enough to cut steel), you can find better quality bimetal blades for it, and if you watch for sales and coupons you can get it for WAY under $100.

This bandsaw is meant to be held by hand for cutting through tubing, etc. HF has a video on its website of one in use. But for cutting out knife blanks I need it to sit vertically.

So, here is a simple stand I made up with some scrap pieces of 3/4 inch plywood and a 2x4:



I can clamp this stand to my Workmate, to the workbench in my shed, or even mount it with lag screws to the studs in a wall--so it gives you several options.

The stand isn't anything fancy--a bottom and back made of the plywood that is fastened with Gorilla glue and screws, and a 2x4 post that serves as an attachment point for the bandsaw itself.



This particular bandsaw has a handle that you can remove by taking out 2 allen-head bolts. I removed the handle and use these bolts (I'm only using 1 currently) as the mounting point between the bandsaw and the upright post. I have a strip of mild steel acting as the mounting bracket.



I added a couple of cleats at the bottom by gluing some thin wood strips at the base of the saw. These are glued to the wood base of the stand, and are positioned so that the bottom of the saw does not shift.



The saw can be removed off the stand simply by taking out the handle bolts from the mounting bracket, replacing the handle, and it's all ready to go for its original intent or if you have to change out blades, etc. If you run the bandsaw in the upright position with the housing cover over the wheels/blade, you'll need to take it off occasionally to clean out any debris since the saw was not designed to run vertically.

But, for me it is working so far. The blade that comes with the saw is a bit coarse at 14TPI and isn't the best, but I did manage to cut out 4 blanks before I chipped a couple of teeth. I'll soon be switching the blade out to a 24TPI bimetal blade. Knowing that this isn't the higher dollar work horse that the Milwaukee or DeWalt is, I take my time feeding the steel through and don't try to hog it. On tiny pieces I don't cut all the way though, that way they don't drop down and interfere with the lower wheel. I still need to fabricate a bigger table for this, but for small stuff it's working OK so far.

These were all cut from 1/8 inch 1080 bar stock. From top to bottom is a boot knife, 2 small Kepharts, and a bird & trout. From here I'll take a file to clean up the profile, drill pin holes in the handles, then start grinding.



Thanks for looking!
Reply With Quote
  #2  
Old 01-16-2012, 12:23 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
Looks like that should work for you. Reminds me a lot of my saw. Mine is the more common one that costs about $200 from HF or Grizzly and comes on a cast iron stand with a built in vise, the whole thing intended for cutting pipe. When I got it, my shop was an 8 x 8 area at the front end of a motorhome so space was at a serious premium. Brand new out of the box I took a hacksaw to it and cut through the cast iron table leaving only a short stub. A couple of holes drilled in the stub allowed the saw to be mounted on a small wooden table fixed in the upright position. That was 15 years ago and I still use that same saw in my shop today. Just another way to get a more powerful saw into a small shop ....


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 01-16-2012, 09:52 PM
NJStricker's Avatar
NJStricker NJStricker is offline
Hall of Famer
 
Join Date: Sep 2005
Location: Central Ohio
Posts: 2,193
Hi Ray!

Necessity is the mother of invention, as they say, or probably more often, modification. I haven't made many knives the last couple of years since my boys were born, so hopefully this little saw will make my rare times in the shop a little more fruitful and enjoyable.

Nathan
Reply With Quote
Reply

Tags
brand, grinding, handle, hobby, iron, knife, knife making, knives, mount, post, supplies


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Harbor Freight bandsaw problem David Peterson Tool Time 12 04-13-2004 08:39 PM
$60 portable bandsaw report offbyone Tool Time 4 04-06-2004 08:54 AM
Harbor freight metal bandsaw? David Peterson The Newbies Arena 4 05-28-2003 12:37 AM
Harbor Freight Bandsaw MongoForge Tool Time 18 09-18-2002 09:14 AM
Harbor Freight Horizontal/Vertical Bandsaw Mike Conner The Supply Center 7 06-20-2001 06:25 AM


All times are GMT -5. The time now is 04:44 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved