The Newbies Arena Are you new to knife making? Here is all the help you will need. |
![Old](images/statusicon/post_old.gif)
05-13-2016, 01:57 PM
|
Enthusiast
|
|
Join Date: Jan 2016
Location: Sugar Land, TX
Posts: 33
|
|
Grizzly Platen Attachment
I'm a new knife maker and I purchased the Grizzly as my entry grinder. I've been having a heck of a time getting a consistent grind line, not to mention the plunge cut. So, I decided to make one that more looked like those that I've seen others use. Initial results are very positive! The belt doesn't move near as much as it did before. I'm very pleased with it.
|
![Old](images/statusicon/post_old.gif)
05-13-2016, 04:12 PM
|
Steel Addict
|
|
Join Date: Mar 2015
Location: Baton Rouge, LA
Posts: 124
|
|
I've thought about doing the same plans for my grizzly. If you have the plans/material list for it that would be awesome. It looks great in the picture
|
![Old](images/statusicon/post_old.gif)
05-14-2016, 12:27 AM
|
Enthusiast
|
|
Join Date: Jan 2016
Location: Sugar Land, TX
Posts: 33
|
|
Well, I don't have any detailed plans. I just modeled it in Sketchup using a model of the grinder someone else had done and uploaded into the 3D warehouse on the Sketchup website. The platen itself is a steel backing and glass face I purchased from Knifegrinderparts.com. I also purchased the wheels. As for the rest, it's scrap steel I cut, welded, and tapped to fit, and wala, new platen attachment!
|
![Old](images/statusicon/post_old.gif)
05-15-2016, 07:45 PM
|
Member
|
|
Join Date: Aug 2015
Posts: 13
|
|
grizzly platen attachment
I would like to see plans for that also. It's nice looking and looks like you could fit it to different grinders.
|
![Old](images/statusicon/post_old.gif)
05-19-2016, 02:37 PM
|
![chadbeatty's Avatar](image.php?s=358ccfad5dacb8001f7fe7e8211c42ed&u=38619&dateline=1464809223) |
|
|
Join Date: May 2016
Location: Buffalo, NY
Posts: 9
|
|
I did nothing that nice, but I did cut a piece of granite tile to size and epoxied it to the furnished platen and it is much better that what it came with.
|
![Old](images/statusicon/post_old.gif)
05-19-2016, 04:13 PM
|
![Ray Rogers's Avatar](image.php?s=358ccfad5dacb8001f7fe7e8211c42ed&u=3&dateline=1059697282) |
Founding Member / Moderator
|
|
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
|
|
Using epoxy alone to put glass (or granite) on a Grizzly platen is risky at best and can be very dangerous. My glass platen got warm enough to soften the glue and then it slid down onto the wheel where it turned into a glass grenade. By the grace of God I had turned around to get something from a table behind me when a few hundred glass fragments were flung in a big circle embedding themselves in both walls, ceiling, and floor but not in me. Ever since then, whenever the subject of glass platens comes up I always recommend putting a metal foot on the end of your platen to prevent the glass from sliding off if it should come loose. You might want to give that some serious consideration ...
|
![Old](images/statusicon/post_old.gif)
05-20-2016, 09:20 AM
|
Enthusiast
|
|
Join Date: Jan 2016
Location: Sugar Land, TX
Posts: 33
|
|
When I was first investigating how I could modify the platen on my Grizzly, I came across Ray's advise in another thread. I took this to heart while searching and found the platen I used at knifegrinderparts.com (I'm not affiliated in any way with them - only providing info). It has a ledge on the steel that is used to support the glass. And I JB welded the glass to the steel.
By the way, as a helpful tip, when you screw whatever you're using for brackets to the platen, attach them BEFORE you weld the glass! I did it after and ended up screwing too far and breaking the glass. It's a good thing two panes were sent with the order.
|
![Old](images/statusicon/post_old.gif)
05-20-2016, 01:41 PM
|
![chadbeatty's Avatar](image.php?s=358ccfad5dacb8001f7fe7e8211c42ed&u=38619&dateline=1464809223) |
|
|
Join Date: May 2016
Location: Buffalo, NY
Posts: 9
|
|
I used JB weld also for the granite. It has higher temp resistance. since the granite is thicker it doesn't seem to be as much of an issue as with thinner material.
|
Tags
|
awesome, bee, belt, epoxy, glue, grinder, knife, material, metal, new knife maker, screw, steel, weld, wheels ![](images/misc/11x11progress.gif) |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
All times are GMT -5. The time now is 07:42 AM.
|