|
|
The Folding Knife (& Switchblade) Forum The materials, techniques and the designing of folding knives. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
The Right Spring for a Boker Speedlock 3000?
G'Day guy's this is my first post on the site; I've had a look through the "Classic Knife Kits" website but for the life of me cannot find the right size spring to convert a Boker Speedlock to it's automatic function. The only reference I have found is to the "Toplock"- as you know a different model:any advice?
|
#2
|
|||
|
|||
I read on another site 0.50 for Boker speed locks 3000,hope this helps
|
#3
|
|||
|
|||
Boker Speedlock 3000
I am also looking at springs to use for a speedlock 3000. In measuring the cavity it appears that a 1/2 inch spring is larger than the cavity but a 7/16 inch spring should be a perfect fit. How does the cavity measure in your knife? The hole in the blade for the spring is relatively small so a lighter tourque should be the one I try first.
|
Tags |
blade, knife, switchblade |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|