Folder Making tutorials

[Txcwboy]

Is there anymore COMPLETE folder making tutorials out there ? I use Rays site and I know Don has a book thats reasonably price that shows his way. I just want to see the other ways there are to make them. Maybe someone should step up ? Us newbies would love to see another complete tutorial on a lockliner

thanks !

Dave

[pipecrafter]

Bob Terzuola's book, The Tactical Folding Knife, is great. I've seen it everywhere for about $15-$20. Loads of pictures, tons of info, and an easily read conversational style similar to Wayne Goddard's books. I highly recommend it if you've got a couple sawbucks hanging around.

[Mike Turner]

Don't know if you have found this or not, http://gbrannon.bizhat.com/#heat

[Messinger]

You'll find links to several here:
http://cardoso.oufti.com/index.php?cat=4

Don't miss the link to page 2 at the bottom.

-Ben

[Osprey Guy]

Although there are no liner lock tutorials there, have you checked out the "Workshop" link at the very top of this page. A number of nicely-done tutorials up there well worth seeing...
http://www.knifenetwork.com/workshop/index.shtml


Dennis Greenbaum

[Osprey Guy]

I came across the following site awhile back...It's by Belgium maker Filip De Coene and it has some interesting content, including a well-done liner lock tutorial.

Before you click on the link below I should tell you that the site is set up rather strangely...If you go by the subject headings at the top of the page you're likely to think that much of the content is missing. But if you click on the subjects running along the right-hand side of the page you'll find a lot of interesting info, pics, etc.
http://custombladeworks.wordpress.com/


Dennis

[Osprey Guy]

Check out the links on this site (don't blame me if you loose a couple days while visiting here).
This guy has put together a TON of great stuff!!!
http://gbrannon.bizhat.com/


Dennis

[Txcwboy]

Those are some good links, but most of the ones I find are outdated and dont work. There were several of the non-working ones on all the stuff that was posted here. I do have Bobs book but its hiding from me right now. I ll work with those for now.

THANKS

Dave

[Wade Holloway]

Along with the liner lock I would like to see a tutorial on making a friction folder.

[logem]

Originally Posted by Txcwboy

Those are some good links, but most of the ones I find are outdated and dont work. There were several of the non-working ones on all the stuff that was posted here. I do have Bobs book but its hiding from me right now. I ll work with those for now.

THANKS

Dave

Bob's book will be all that you need for a while. Be patient.

Mike L.

[Messinger]

There is a friction folder tutorial in the pages I linked (see my previous post).
-Ben

[Wade Holloway]

Originally Posted by Messinger

There is a friction folder tutorial in the pages I linked (see my previous post).
-Ben

I saw that but the link does not work. I keep getting a can not find page window.

[Mike Turner]

Here is the link Wade for the friction folder.

http://www.britishblades.com/forums/...older+tutorial

[Don Robinson]

Originally Posted by Txcwboy

Is there anymore COMPLETE folder making tutorials out there ? I use Rays site and I know Don has a book thats reasonably price that shows his way. I just want to see the other ways there are to make them. Maybe someone should step up ? Us newbies would love to see another complete tutorial on a lockliner

thanks !

Dave

Dave, I've been very sick following surgery, but I've read a few of the troubles you're having with linerlocks, such as locating and installing the detent, locating the stop pin, etc.

All these things are covered in great detail in the book "My Way". If you had obtained a copy of the book, you wouldn't be having these problems.

Sorry to be so blunt, but it's the truth.

[Wade Holloway]

Thanks Mike