![]() |
![]() |
![]() |
|
![]() |
![]() |
||
![]() |
![]() |
|
![]() |
|
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
![]() |
|
Thread Tools | Display Modes |
#61
|
||||
|
||||
Anyone around the Cincinnati, Oh area. I need some help---actually a lot of help
![]() ![]() |
#62
|
||||
|
||||
Mike
Bowie conducts a Hammer-in twice a year just outside of Knoxville that draws a lot of local and out of state knifemakers. Great place to gain some knowledge and make some connectoins. Might check and see when James plans his next one, down in the "Outpost" section here at KNF. I conduct two Trackrock Hammer-ins a year, one late March and one late Sept. in Blairsville, GA not all that far from Knoxville...same deal on opportunities. I post announcments here and in the Georgia Guild section. The date for the fall event is the last weekend in Sept. Send me a pm if you want particulars or to be placed on the email list. There are alot of makers in ETN, WNC and NGA, probably multiples in almost all towns. You just have to ask around a bit at woodshops, hardware stores, barbershops, etc. I knew Bob over in Coker, very talented gentleman. Used to stop and visit on my way out Tellico Plains drop off some fresh trout. My hideout over in Hanging Dog is not all that far from Coker (as the crow flies), just don't get over that way often anymore. __________________ Carl Rechsteiner, Bladesmith Georgia Custom Knifemakers Guild, Charter Member Knifemakers Guild, voting member Registered Master Artist - GA Council for the Arts C Rex Custom Knives Blade Show Table 6-H |
#63
|
||||
|
||||
Hey Teddy. I'm in the same state but I'm up towards Akron (Wooster technically but I'm assuming you do don't where that is), and thats about 3.5 hours away... you might as well be in a different state, Kentucky for instance
![]() |
#64
|
||||
|
||||
Quote:
I am going to canton this summer. I'll call before I come If you give me lyour contact information. Teddy |
#65
|
|||
|
|||
Albuquerque: Trade knifemaking lessons for brewing lessons.
You teach me how to improve my fledgling knifemaking skills and I teach you to brew beer!!
I brew all-grain, 5 or 10 gallon batches, grind my own grain and keg the final product. So, if you want to take some time out of your schedule to let me learn from you the finer points of knifemaking, I will return the favor and teach you what I know about brewing beer. Just let me know by pm on this site. Thanks. Dennis Last edited by Cake_14N; 08-27-2013 at 09:14 AM. |
#66
|
|||
|
|||
Teddy, I am will to give you a hand on knifemaking...I am in Hamilton, Ohio, just north of Cincy...Email me and we can get together some time..I am retired.........combs6136@yahoo.com
__________________ carl |
#67
|
|||
|
|||
Sorry, that's willing...............carl
__________________ carl |
#68
|
|||
|
|||
Anybody near San Bernardino, CA?
|
#69
|
|||
|
|||
Need help.
I am looking for some one in or around northern Ohio that can give me some pointers.
|
#70
|
|||
|
|||
Missouri
Anyone in the central or northern Missouri area?
Thanks |
#71
|
|||
|
|||
Same as you
Quote:
|
#72
|
|||
|
|||
I am on the West side but would love to show you some stuff too. Hang in there and it will come.
|
#73
|
|||
|
|||
Thanks. We will have to get together when the weather better.
|
#74
|
||||
|
||||
TnRed
Check out the top of this page about Bowie's Hammer-ins. __________________ Carl Rechsteiner, Bladesmith Georgia Custom Knifemakers Guild, Charter Member Knifemakers Guild, voting member Registered Master Artist - GA Council for the Arts C Rex Custom Knives Blade Show Table 6-H |
#75
|
|||
|
|||
Anyone in southern GA that would be willing to let me sit in a while and learn a little about grind lines? I have about 10 blanks in my shop that I messed up trying to get them right. email me here or at
khurley1@gmail.com |
![]() |
Tags |
art, blade, bowie, design, fixed blade, flags, forge, forging, grinding, guard, hammer, hunter, hunting knife, knife, knife making, knifemaker, knives, kydex, mentor, newbie, sheath, sheaths, steel, teach, tools |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|