MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 11-24-2016, 09:38 AM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
another DUH moment

OK guys so I had one of those DUH moments.....yes again! so I got a piece of DAMAsteel at the knife show the other day. planed on using it for bolsters there is only enough for maybe bolsters on 2 knives so not enough for a full blade. how ever I was thinking about it and here is the duh moment. if I etch it before putting it on I willgrind away the pattern along with the excess of pins. and idk how I could etch it after they are on and ground how can I etch them and not mess the finish up on the blade. .....the only way I see of doing it is mounting them with screws like would be done on a folder and maybe a lil bit of glue not a lot cause I wouldn't want it to squeeze out the sides where I would have to grind it off and hit the side of the bolster.....I am just wondering if any one has any other ideas how this may work that I might be overlooking
Reply With Quote
  #2  
Old 11-24-2016, 10:58 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
Use temporary pins, don't peen them much at all. Shape the bolsters as normal, remove them, etch, and put them back with permanent pins...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 11-24-2016, 11:19 AM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
not sure I understand right but if I shape with temporary pins then etch when I put in the permanent pins peen wont I grind off the pattern in the process of grinding the permanent flush with the bolster?
Reply With Quote
  #4  
Old 11-24-2016, 11:59 AM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
I never said it would be easy. Just one more reason I hate bolsters.

You'll have to adjust the length of the pins carefully before you put them in so that no sanding is needed. Light peening will hopefully be enough, or you could try doming the pins ...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #5  
Old 11-24-2016, 12:28 PM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
always a challenge...ill try it but if I don't get the length of the pins right do you think 2 small screws would work? check the link below that's what I mean 2 of those and I am thinking maybe just a couple of drops of epoxy just not enough where its oozing out the sides so I wont have to grind it off.
http://usaknifemaker.com/knife-handl...32-screws.html
Reply With Quote
  #6  
Old 11-24-2016, 12:42 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is offline
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
Sure, screws will work. Most people who go to the trouble of using damascus for bolsters don't want screws spoiling the look of the pattern though. And, those screws in your link are not 'small screws', they are about as big as any screw you'll ever see on most folders. Look at the big screw on the pivot of one of your folders, most of those are 8-32 ...


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #7  
Old 11-24-2016, 01:02 PM
dtec1 dtec1 is offline
Guru
 
Join Date: Aug 2015
Location: ny
Posts: 1,438
yeh I know I have a couple sets like that in different sizes I am going to try an keep them small so it doesn't interfere with the pattern as much I just picked that link as a example of what I ment not the right size. going to finish the tanto today or tomorrow (depends how much time I can work on it today) the next blade I got cut out and HTed I am going to put this damasteel bolster on that one
Reply With Quote
  #8  
Old 11-24-2016, 09:50 PM
damon damon is offline
Skilled
 
Join Date: Jul 2013
Location: NE Tennessee
Posts: 409
pin on bolsters.....
spraypaint everything......
shape bolsters......
etch....
clean off paint, and put on handle material.
Reply With Quote
  #9  
Old 11-24-2016, 09:56 PM
damon damon is offline
Skilled
 
Join Date: Jul 2013
Location: NE Tennessee
Posts: 409
ive etched stainless pins after pinning on bolsters, and not had any issues.

the only screws ive used on bolsters were 2-56, or 0-80.
8-32 are huge by comparison.
Reply With Quote
Reply

Tags
back, blade, bolster, bolsters, damascus, easy, epoxy, etch, folder, glue, grind, grinding, handle, hardware, knife, knife show, knives, material, pattern, pins, rivets, sanding, screws, show, small


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A DUH Moment! Hurley The Newbies Arena 8 11-09-2013 08:54 AM
A moment of silence Drac Knife Network Community 12 09-14-2007 02:02 PM
An Historical Moment! Tim Adlam Knife Network Community 0 03-11-2003 10:08 PM
A moment of silent prayer wrathlord Knife Network Community 1 01-09-2003 09:49 PM
Just lifting my crosses for a moment , Please. Geno Tool Time 7 05-22-2001 08:02 AM


All times are GMT -5. The time now is 05:06 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved