|
|
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Electro etching question
I have just made myself an electro etcher and have managed to make my own stencils. Can anyone tell me If I can re-use the developing solution for more than one stencil or do I have to throw it out. I know this sounds as though I'm being tight with the materials but as I live in the U.K and can only get developer from the U.S I have to save some costs.
Andy |
#2
|
||||
|
||||
As far I know you can re-use it many times. There should be some info. that came with it on when it is depleted. My system's instructions say when the solution turns yellow to replace it.
|
#3
|
|||
|
|||
Thanks for that, I got the developer and stencils from Martronics and they did'nt send any information or instructions
Thanks Andy. |
#4
|
||||
|
||||
I use the EDX-40 developer from IMG and have re-used it many times. I would imagine your developer would do the same. It might be wise to store the used developer in a light tight bottle. I'm not sure but strong light might help to break it down....
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|