MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 05-25-2001, 04:17 PM
5Trey5
Guest
 
Posts: n/a
brass


In order to bend brass, nickel silver, etc,- do you heat it up first? I know you don"t want to overheat it. Thanks, Trey Walker
Reply With Quote
  #2  
Old 05-25-2001, 05:10 PM
Ed Caffrey
Guest
 
Posts: n/a

You'll have more luck with brass, by bending it cold. The trick is to anneal the brass, before, and during the bending. This is done by heating the brass to a dull red, and then quenching it in water. Non-ferrous alloys (those without any iron) are just the opposite of Ferrous alloys (those containing iron). Another thing to be aware of is the type of brass you have........300 series brass is the eaisiest to work with. Some of the others will give you fits, no matter how careful you are with them.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

(View-All Members who have read this thread : 8
coldtracker, jpilgrim, metal99, Mkscho67, Phxguy66, rebender49, sanguip, warren
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 05:12 PM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved