MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Factory Knife Customization & Mid-Tech Boards > Randall Knives Forum

Randall Knives Forum Discuss Randall Knives

Reply
 
Thread Tools Display Modes
  #1  
Old 04-27-2005, 10:00 AM
escapement's Avatar
escapement escapement is offline
Enthusiast
 
Join Date: Apr 2005
Posts: 37
Randall Model 5-6 Angier Setup

OK, this might be my perfect Randall user. I?ve been waiting for this one for 2 years and she finally arrived yesterday.
An Angier's setup Model 5-6, i.e., with stainless blade, NS hilt, black Micarta handle with compass in butt, and wrist thong.
She?s a real beaut, and I think she makes it to the top of the ?user? list?just *perfect* for me, for what I normally need from a knife. I?m not a big hunter though I do try to go out once a year or so (but even then, happily leave the skinning to anyone else who?d rather do it), but I am an avid outdoorsman and love spending time on the water. Up to now, I?ve been using a #10-5 on the boat (and really love that knife too?a great value/ knife), but I?ll be upgrading to this #5-6 as my boat knife now, and as my all-around user.
What a slick knife.
Gary

Model 5-6 Angier?s setup.












Last edited by escapement; 04-27-2005 at 11:52 AM.
Reply With Quote
  #2  
Old 04-27-2005, 10:17 AM
thewap's Avatar
thewap thewap is offline
Steel Addict
 
Join Date: Apr 2005
Location: Where sky meets steel
Posts: 252
Thumbs up

I like it. It's a beauty. Nice clean lines!!


__________________
Thewap
Reply With Quote
  #3  
Old 04-27-2005, 01:29 PM
Gamble Gamble is offline
Registered
 
Join Date: Apr 2005
Posts: 4
Would you concider having the handle chequered? The knife will be even slicker when wet...dangerously so in my opinion.


__________________
Gamble Staempfli
RKS 4504
Reply With Quote
  #4  
Old 04-28-2005, 07:46 AM
escapement's Avatar
escapement escapement is offline
Enthusiast
 
Join Date: Apr 2005
Posts: 37
What's the best handle material/ config choice for water?

Hi Gamble,
I don?t think I?d like checkering much, though you're probably right that the handle might become slippery when wet?but not any more, really, that most other handle materials (or configurations, for that matter). Personally, I just don?t like the look of checkering.
My #10-5 is Micarta too, but it does have the one finger notch, which may help a bit, but it works well when wet, as well as can be expected, I suppose. (Actually, if you twist my arm, I?ll probably tell you that the #10-5 is a perfect boat knife and there just isn't a need for anything else, but this #5-6 is a bit prettier so I will give her a try).
But with this handle shape, the way it?s tapered, I think that too, makes for a safer hold. And I?ve noticed that Micarta (at least on my #10) gets a bit tacky when wet?i.e., it doesn?t become *very* slippery. (But I guess that depends on just how wet and other circumstances).
There is the wrist thong?that helps when the knife slips from the hand.
But I can't really think of a much better setup for water. Even Micarta with finger grips will get slippery too. Leather gets slippery when wet, right? Stag or ivory?probably worse choices? Rosewood?

What do you think would be the very best material/ handle choice for water?
Thanks, Gary
Reply With Quote
  #5  
Old 04-28-2005, 08:19 AM
TAH TAH is offline
Enthusiast
 
Join Date: Mar 2004
Location: USA
Posts: 83
Hi Gary,

My guess would be rubber or textured G-10. Both are excellent when wet. As for a Randall, Micarta is the best choice. Personally, I don't find it to be that slippery.

Best,
Tom

PS - Good lookin' knife you got there! You're not going to actually use it are you?
Reply With Quote
  #6  
Old 04-28-2005, 10:52 AM
Gamble Gamble is offline
Registered
 
Join Date: Apr 2005
Posts: 4
I tend to agree the chequering doesnt look as good as a smooth surface. But I would still do it on a micarta user. Any handle will be easy to hold onto if your fresh, but when you get tired chequering could mean the difference between your holding onto the knife and having it slip into the "endless blue wine". Wrist thongs scare me, because for instance if you slip and fall on deck in the rain your probably going to let go of the knife so you can break your fall, Ide rather have the knife go overboard than into my forearm or through my hand.

True when you drop it by accident having it attached to you makes sense, but if you drop it on purpose chances are you want it to fall at a safe distance.

Remember "Iron" Mike Tysons enduring quote "Everybody has a plan until they get hit."

I dont do much boating but I guess the reason I would choose the 5-6 over the 10 is because you may need to chop something quick, and the feathery 10 would be useless. I cant think of anything the 10 could do that the 5 couldnt.

I carry a 5-6 with stacked leather and a brass crowsbeak, use it all the time, it handles great in any weather condition, and actually gets very grippy when wet, but now that I think about it leather can get slimy/slippery when it gets really really wet. The crows beak makes a nice stop if Im chopping small brush, and has prevented the knife from catching air when Ive chopped a lot and my grip has weakened.

Just imagine a worst case scenario...something like; your foot is trapped in some rigging and the boom is headed for your face. Which knife would you rather have to cut yourself free. Forgive my indulgences, as I said Im not much of a boater so I have no idea if that scenario is even plausible.


__________________
Gamble Staempfli
RKS 4504
Reply With Quote
Reply

Tags
blade, knife


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 10:10 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved