|
|
Register | All Photos | FAQ | Members List | Calendar | ShopStream (Radio/TV) | Search | Today's Posts | Mark Forums Read |
The Newbies Arena Are you new to knife making? Here is all the help you will need. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1/4 x 1/4 square stock brass or NS
Hello,
Does anyone know where to find 1/4 x 1/4 square stock? Preferably NS but will take brass as well. Thanks, Ike |
#2
|
||||
|
||||
I didn't have any luck spotting that exact size in my catalogs from knife supply places but I did see 1/4" n/s bar that could be cut down into strips. Sheffield had them and probably others do too.
Any big hardware store could have brass square rods in that size...... |
#3
|
|||
|
|||
Yep,
I checked Texas and Sheffield before I posted. And my local Home Depot has only brass rod. And I have no way of reliably cutting or grinding a larger piece down unless its pretty close to start with. Thanks Ike |
#4
|
|||
|
|||
Try A good Industral Tool Supply for brass key stock
James __________________ Blademan KnifeMakers Are Pretty Sharp People |
#5
|
|||
|
|||
Sears has a display nowadays that has a lot of brass stock. They had 1/4x1/4" square brass tubing, but not solid stock, if that would help at all.
|
Tags |
knife |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|