|
|
Tool Time Let's talk shop. Equipment, Tips & Tricks, Safety issues - Post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Foot Switch?
How does a foot switch work (how do you install them) I have a variable speed disc and horizontal belt sander and I would like to hook them up to a foot switch. both use the same variable speed drive.
thanks Ted |
#2
|
|||
|
|||
Most foot switches have Norm. open, Norm. closed and common terminals.You would use the norm. open and common terminals.On the drive end, you need to look in your manual for which terminals to hook up a remote switch at.I can't help you there because there are so many models.Once found make your connections and you will also need to locate which parameter controls the switching funtion and change it to remote operation.Thats the best I can do from here.15 minute job at my shop.good luck .Dave
|
#3
|
|||
|
|||
thanks Dave, If I understand correctly I would connect it to the vfd. I have a vfd from Beumont metal works.
|
#4
|
|||
|
|||
Yes, and if it's one of Rob's I am sure he knows the exact terminals to connect to.Dave
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|