3-7inch EDC's Bubinga,Rosewood,Black Walnut scales, Nice

[Kenhills]

Hi All,

Not as busy a week as I had hoped for but here is what I did get to. All I had to work with was a 3.5 inch by 7-inch pc. of 3/16 1095 and some really nice wood.

Specifics: Top knife with false( barely) upper edge and Bubinga scales
Material: Aldo?s 3/16ths 1095 hardened and tempered to a Rockwell 60
Handle Material: Bubinga with 2 brass pins
Over all Length: 7 inches
Height: at the widest part of the blade is 1 1/8 inch
Blade length: From the scale to the tip is 3.5 inches
Cutting Edge: 3 1/8 inches
Hollow grind with a mirror finish and hair popping sharp.
Price delivered to the lower 48 $125.00


Specifics: middle knife with double edges and Rosewood scales
Material: Aldo?s 3/16ths 1095 hardened and tempered to a Rockwell 60
Handle Material: Rosewood with 2 brass pins
Over all Length: 7 inches
Height: at the widest part of the blade is 1 inch
Blade length: From the scale to the tip is 3.5 inches
Lower cutting edge: 2 7/8 inches
Upper cutting edge: 1.5 inches
Hollow grind with a mirror finish and hair popping sharp.
Price delivered to the lower 48 $125.00


Not as busy a week as I had hoped for but here is what I did get to.

This is what I do with a 3.5 inch by 7-inch pc. of 3/16 1095

Specifics: Bottom knife with Bowie style blade and Select Black Walnut scales
Material: Aldo?s 3/16ths 1095 hardened and tempered to a Rockwell 60
Handle Material: Select Black Walnut with 2 brass pins
Over all Length: 7 inches
Height: at the widest part of the blade is 1 1/8 inch
Blade length: From the scale to the tip is 3 5/8 inches
Cutting edge: 3 1/8 inches
Hollow grind with a mirror finish and hair popping sharp.
My personal favorite, I just like the lines.
Price delivered to the lower 48 $120.00






















Visit me at Mongrelknives on Facebook and thanks for looking.