MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions

Knife Making Discussions A place to discuss issues related to all aspects of the custom knifemaking community.

Reply
 
Thread Tools Display Modes
  #1  
Old 01-14-2017, 04:42 PM
tyrippin tyrippin is offline
Member
 
Join Date: Dec 2016
Posts: 11
Exclamation Glass platen for 1?30

Hey guys, so I am going to try putting a fire glass platen on my HF 1 ?30
Anyone done this before?
I have a perfect size price of fire glass I got for phubar meant for knife make.
My issue is how to put it on there sturdy. I have some loctitie 5 min 3200 epoxy, or I have some 3m heavy duty double side tape I believe is vhb.
I was told to attach it to a same size price of steel then attach that to the stock platen .? Please help me here with best method?
Don't want to ruin it cause not sure if I can by another HF platen .
Thanks guys!
Ty ripped
Nervana co..
Reply With Quote
  #2  
Old 01-15-2017, 07:40 AM
Andrew Garrett's Avatar
Andrew Garrett Andrew Garrett is offline
Moderator
 
Join Date: Jun 2005
Location: Nampa, Idaho
Posts: 3,579
To attach any piece of pyro-glass, you need a hard shelf at the bottom as a mechanical form of security. That way, if the chemical (epoxy) bond is compromised, it stays put.

I held my glass to the platen where I wanted it, and marked two spots to drill and tap for two socket screws like these:


Size is unimportant. Just make sure that the glass is thicker than the heads so the heads don't impact the belt, and be sure they are level across so the glass edge sits against them and is still aligned with the platen.

I then cleaned all my bonding surfaces and used my normal epoxy for the job. Use plenty so it self-levels and be sure to get some on the screw heads and bottom edge of the glass to secure than connection.

I've been running like this for about a decade (give or take a year or two) with zero issues.


__________________
Andy Garrett
https://www.facebook.com/GarrettKnives?ref=hl
Charter Member - Kansas Custom Knifemaker's Association
www.kansasknives.org

"Drawing your knife from its sheath and using it in the presence of others should be an event complete with oos, ahhs, and questions."
Reply With Quote
Reply

Tags
bee, belt, blade, chemical, drill, edge, epoxy, fire, how to, knife, make, screws, steel, tap


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Glass in Acraglass Eli Jensen The Newbies Arena 9 06-13-2013 10:20 PM
Glass platen attachment va-banjopicker Ed Caffrey's Workshop 10 04-19-2012 08:34 PM
Installing a Ceramic Glass (PyroCeram) Platen... ARCustomKnives The Newbies Arena 15 12-01-2010 11:47 PM
? glass: snowblade The Newbies Arena 3 07-30-2005 12:35 AM
Glass Knife flisk The Display Case 8 05-19-2005 11:01 PM


All times are GMT -5. The time now is 10:08 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved