MEMBER ITEMS FOR SALE
Custom Knives | Other Knives | General Items
-------------------------------------------
New Posts | New PhotosAll Photos



Go Back   The Knife Network Forums : Knife Making Discussions > Custom Knife Discussion Boards > Knife Making Discussions > The Newbies Arena

The Newbies Arena Are you new to knife making? Here is all the help you will need.

Reply
 
Thread Tools Display Modes
  #1  
Old 09-24-2012, 03:30 PM
XWrench3 XWrench3 is offline
Registered
 
Join Date: Sep 2012
Posts: 1
modifications???

hi, this is my first post, so if this belongs in another place, please move it there. i have made a few knives on my own, noting at all fancy, but they do what i have intended them to do. which is mostly take abuse. but his question is a modification to a store bought knife. it is a Winchester brand (so who knows who makes it) 3 blade lock blade knife. it is made to be a hunting knife, a regular cutting blade, a gut hook, and a saw blade. the saw blade is the one i need to modify. while it works fair on soft woods, it hardly even makes a mark in bone. i need this to cut thru the pelvic bone if a whitetail deer. and i really ma not sure how to modify this so it will really cut, rather than grind slowly. my eyes are not great, so i got a magnifying glass out, and looked at it carefully. and they have ground these with an angled cut going both ways. so it should "cut" in both directions. there is no kerf, and the blade is so thick, there is no way i would be able to bend it to make one. they alternate the cutting of the teeth, so that every other one cuts on the opposite side. basically, they look like cross sections of a pyramid corner, facing opposite one another. this results in two high points, one on each outside edge of the blade. oh, and the top edge is rounded off, i really have no idea why they did that. i can sharpen the regular blade, and the gut hook with no trouble. but this one i am not sure how to attack. if i can realistically sharpen what is already there, or if i need to grind it flat, and start over. i know you would like to see a picture, but i have had many problems trying to do so on many other web sites. i do not know what setting in my computer is stopping me from uploading them, but i have not been able to figure out how in several years of trying. i am good with my hands, but lousy with electronics.
Reply With Quote
  #2  
Old 09-24-2012, 07:01 PM
Ray Rogers's Avatar
Ray Rogers Ray Rogers is online now
Founding Member / Moderator
 
Join Date: Jun 2002
Location: Wauconda, WA
Posts: 9,840
As a rule, we pretty much avoid the whole question of saws on these forums since the general consensus among knife makers is that a good knife will do most anything that you need to do but if you must have a saw then carry a saw. That's not much help, I know, but truly that's what I'd do. I've got a small folding saw that cuts like a maniac and it's just big enough to get a good grip on. I also have saw blade on a Swiss Army knife that cuts well too but it's so small as to be useless for any life sized task like that pelvic bone. If you could go to a store and see either of these saws that would probably tell you how to modify the one you have better than anything we could say here....


__________________

Your question may already have been answered - try the Search button first!






Reply With Quote
  #3  
Old 09-24-2012, 09:34 PM
Cthulhu Cthulhu is offline
Skilled
 
Join Date: Jun 2012
Location: Kannapolis, NC.
Posts: 439
What Ray said. Theres no knife that will do a Saw, or a Hatchets job, properly.

Get the right tool for the job, and you'll be happy. Also, trying to saw bone with a folding, non locking, pocket knife is just asking to break the knife. Lever it the wrong way, get hung up, and pow.
Reply With Quote
  #4  
Old 09-30-2012, 02:40 PM
metal99 metal99 is offline
Master
 
Join Date: Mar 2012
Location: Saskatoon, Saskatchewan Canada
Posts: 859
I have a nice little hatchet that's only 1/4" thick. That's what I use for the pelvise bone and its really quick. I just make sure it's razor sharp. There's no saw out there that would do the job as fast as my little hatchet. Well... Maybe a chain saw but...
Reply With Quote
Reply

Tags
art, bee, blade, brand, edge, first post, flat, folding, folding knife, how to, hunting, hunting knife, knife, knives, lock, made, make, pocket, pocket knife, post, razor sharp, saw blade, sharp, store, woods


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
modifications and options for Grizzly grinder flintpoint The Newbies Arena 6 06-25-2003 08:52 PM


All times are GMT -5. The time now is 08:27 AM.




KNIFENETWORK.COM
Copyright © 2000
? CKK Industries, Inc. ? All Rights Reserved
Powered by ...

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved