|
There's usually a bearings specialty shop in just about any industralized town. Do a google for a local and take the one you have with you. They can usually set you up on the spot. Replace both - always. Then look close to make sure that your bearing "seat" in the yoke is not wallowed out....that can cause the next one to fail as well.
The local down here is Bearings of the South or some thing like that. Guys are really helpful.
__________________
Carl Rechsteiner, Bladesmith
Georgia Custom Knifemakers Guild, Charter Member
Knifemakers Guild, voting member
Registered Master Artist - GA Council for the Arts
C Rex Custom Knives
Blade Show Table 6-H
|