Thread: 416 Bolsters
View Single Post
  #2  
Old 05-11-2018, 03:25 PM
Steve's Avatar
Steve Steve is offline
Moderator
 
Join Date: Jun 2002
Location: Manti, Utah USA
Posts: 1,244
2 is probably OK on that size. In that small area it is very difficult to peen the pins without getting into problems with the adjacent pins. If you get much wider I would put four pins in them, say 3/4” to 1” and more.
I make sure that the choil is polished before I put bolsters on, but I rough up the surface on the tang underneath the bolsters before I attach them.


__________________

http://www.srjknives.com
NRA Endowment Member
Knifemakers' Guild Member since 1971
"May you live all the days of your life." - Jonathan Swift
Reply With Quote