View Single Post
  #2  
Old 10-24-2019, 03:48 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
I use a radius wheel.

Most knife makers who do a hollow grind on their knives use, typically an eight inch or ten inch wheel. They practice until they get good at it or use a jig like I do. I mostly do flat grinds, but that's just me. Some knives are best served with a flat grind like kitchen or filet knives. I hope that helps.
Reply With Quote