I found a 70# Champion powder hammer last Jan. and when I got it to my shop I had to move it nearly 75 yards through the back yard and into the shop. My wife and I used three pieces of plywood and 5 pieces of 1/2 water pipe and well you can guess the rest. Took us around 5 hours to roll it to the shop. Dang thing probably weighs around 1500#

I used three layers of 6x6 timbers with the top of the third layer flush with the ground. The base is 3 feet by 4 feet. I used 1/2 x 8" lag bolts to bolt it down and so far it's doing OK. It hasn't settled any yet and it gets used quite a bit.

Micky