|
your better off using the bolts to "dry fit" than trying to glue temporarily depeding on the glue and the handle material it can rip off a piece of the handle material when you go to separate the glue. I have been making a lot of folders and i don't like using clamps for everything so i use crazy glue and say i want to grind the 2 liners even i glue grind then separate when i put the handle material on i glue it to the liner drill the holes and separate then use screws to hold on i have tried a fe differnet ways to separate stuff after glued and the bet is just using a couple drops of glue then when i separate i take a razor blade and wedge it between the two material and lightly tap with a hammer and the razor seperates it then acetone to clean off the glue....that being said some materials you just cant do this cause there is a significant risk of ripping the aterial apart when you try to separate.....just dry fit with corbys or pins or what ever grind then take apart
|