need help with my first folder
G'day Folks,
I live in Melbourne also Brett, however I buy most of my materials from the States. I use 1/8" for the blade pivot and 3/32" for the bar pivot and spacer pins. If you want to add the bolsters to the liners instead of an integral I would suggest 1/16" liners and 3/32" or 1/8" bolsters with 1/16" or 3/32" pins to hold them on.
Regards from Australia
__________________
Neil Charity
neil@neilcharity.com
http://www.neilcharity.com
|