View Single Post
  #36  
Old 09-01-2016, 03:40 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Oh, just as an aside. If you are air quenching a steel from high temp and you have a brass brush, try brushing the part while it is hot. The brass will come off all the way down to about 300 degrees and brass plate it. I used to brass plate my welds that way. Boss asked me why I made the parts out of brass once. I used to do it to O1 knives, but I had a big brush.
Reply With Quote