View Single Post
  #5  
Old 10-29-2018, 10:09 PM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
On the bandsaw go with like 6 or 8 tpi. It's what I used on my 9' Ryobi for 1/4" lexan, wood, aluminum, brass and micarta. If you cut G10 you'll dull your blade, use an old blade.
I get my bandsaw blades from an online company named Pro Bandsaw Works and I had to readjust and tune my bandsaw for their slightly thicker blades and they have a larger kerf and I literally use their 8 tpi blade for everything. edit; my mistake 10 tpi

https://www.probandsawworks.com/

Last edited by jimmontg; 10-29-2018 at 10:28 PM.
Reply With Quote