Thread: Ht issue
View Single Post
  #14  
Old 10-24-2017, 10:17 AM
jimmontg jimmontg is offline
Guru
 
Join Date: Jan 2016
Location: Now live in Las Cruces NM.
Posts: 1,345
Blitt you shouldn't be able to see crystalline structure, it should look like grey velvet as shown in Rasmus' picture. Also a trick to use is to put a barbecue regulator on the propane and turn the flow down for HT as forge temps at 1900+ aren't needed. The low flow regulators cost about $25 at Lowes. It takes practice. but you can get a surprising amount of heat control using a regulator.

Last edited by jimmontg; 10-24-2017 at 10:22 AM.
Reply With Quote