Thread: Help With Knife
View Single Post
  #9  
Old 06-28-2017, 09:08 AM
BoBlade BoBlade is offline
Moderator
 
Join Date: Mar 2005
Posts: 955
Thanks, Jack. I think it's a 7-5 as well. You can get a good reference on the blade length by comparing the handle length (Including the hilt) which is roughly 4 1/2" for a medium size Randall vs. the blade length. In this case the blade is not much longer than the handle. Randall did not offer a 3-5 in the mid 50's.

I put the knife mid-fifties primarily because of the stone. I believe the sheath was in the bin for a couple of years because of the three number marking.

The blade is a "Model 6 grind"! Very rare for a knife this early. I've only seen two Model 3's with a 6 grind this early. No Model 7's.

What stands out to me is the quality of the stag handle. Maybe 1/50 were this good.

The condition is outstanding. I believe most of the schmutz on the blade can be cleaned up by a light polish with a metal cleaner.

OP: Welcome to the world of Randalls. I hope this knife gives you a lifetime of pleasure.

Regards to all,

Ron

Last edited by BoBlade; 06-28-2017 at 09:17 AM.
Reply With Quote