Quote:
Originally Posted by Hunter10139
I believe I've only seen one guy on this forum have good success grinding bevels with a 1x30, and that's PoolQs(sorry if I omitted anyone else skilled with the 1x30, it was unintentional).
|
Hunter is correct, I have been making knives for 2 years now and have ONLY used a 1x30.
I have made 28 knives with mine and have sold everyone that I have made. Now, is it the best
machine to use for this task? NO. But it is what I can afford and I really want to learn how to
make the best knife I can before I make the major leap into a 2x72.
This machine takes A LOT of patience and practice. 1x30 turns very fast and heats everything
up very fast. Where most makers can bevel out a blank in an hour or less, it might take me 4-5 hours.
I do use it for everything. Blanks, bolsters, scales, etc. I have an extensive array of belts for
my 1x30.
Use what is in your price range and learn to do the best with what you have. Once you have
gotten to a point of confidence, then you can move up in materials and machinery.
If you have any specific questions on how to's on the 1x30, feel free to ask.
Troy