View Single Post
  #5  
Old 02-04-2018, 10:48 PM
dennyg dennyg is offline
Member
 
Join Date: Nov 2015
Posts: 18
First, there are two ways to look at etching, depending on your purpose. I use Whink Rust Remover to etch before anodizing since Whink contains hydrofluoric acid in diluted form. It works well and is widely available and reasonably safe.

But the etching I’m interested in is electro etching my logo on titanium. From the post above, there is a electrolyte available for that purpose.

I’ll order some and come back and post my results.

Thanks all for your help!
Reply With Quote