If your problem is not being able to hold a consistant angle then one of those clamp on devices can help. I use the Razor's Edge clamp to set the initial bevel on some of my knives. It can be used on a stone (as it was intended to be used) or even against a sanding belt. Using it on a belt sander gets the job done quickly but you'll need a new clamp a couple of times a year! They cost about $15.
The clamps are sized according to the size of blade you will sharpen, either under 4" or 4" or more in length. To sharpen the curved tip of a blade just lift the knife handle and keep the edge of the blade in contact with the stone...
|