The Knife Network Forums : Knife Making Discussions

The Knife Network Forums : Knife Making Discussions (http://www.knifenetwork.com/forum/index.php)
-   The Supply Center (http://www.knifenetwork.com/forum/forumdisplay.php?f=8)
-   -   Electrolyte (http://www.knifenetwork.com/forum/showthread.php?t=57773)

Eli Jensen 01-16-2012 09:39 AM

Electrolyte
 
Anyone know a good source for general purpose electrolyte solution for etching that doesn't have high shipping rates? Using an etch-o-matic. Cheapest shipping for a $10 item I've found is $15.

xspook2158 01-17-2012 07:06 AM

Cpt,

I could be wrong but I believe most of that is the Haz Mat Fee.

I know when I order Calicium Carbide I pay $20 to 25 for the Carbide, ( Miners or Cavers Carbide ). But the order always totals out to approx a $100 including shipping.

By the way, if you find less expensive shipping for the electrolyte Pls let us know.

Jeff

Eli Jensen 01-23-2012 10:13 PM

Sometimes I get really upset when I face shipping charges that I deem "unfair." I'm always on a budget and sometimes it sets me back. But lately I've been very blessed financially, meaning not rich or affluent by any means but stable, and so I try and remember that worrying about a few bucks isn't worth my health. Not to mention 16oz is enough to etch A LOT of knives.

This was the best that I found and what I ordered. A little leaky.

http://www.ebay.com/itm/360423270511...84.m1439.l2649

Jason Fry 01-25-2012 10:09 PM

Tracy Mickley sells etching solution, and I don't recall him charging me extra when I bought mine. Shipping from usaknifemaker is usually under $10, if I recall correctly.


All times are GMT -5. The time now is 09:07 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
The Knife Network : All Rights Reserved